Owners manual

BX3784
2008-12 Toyota Scion XB
(with fog lights)
Installation Instructions
405-0054 Rev. F Page 8 of 9 1/25/12
20A

21. Reattach the vent tube using a #10-16 x 1”
self drilling screw with a 1/4” at washer.
21

20. Attach top and left washer reservoir with #10-16 x 1” self drilling screws with 1/4” at washers into
frame. Reattach all wires and hoses.

20B
23. Put the temperature sensor back on the little
plate in front of the radiator.
23
22. Attach the permanent baseplate safety
cables to the provided convenience link on
the baseplate (see grey arrow). The photo
above shows the recommended installation
of the cables to frame of vehicle (see white
arrow). Additional options may interfere with
suggested mounting; in this case secure
the cables to a solid piece of the frame as
described in the instructions included with the
permanent baseplate safety cables. Be sure
the safety cables do not rub against any hoses
or moving parts. Do this to both sides of the
vehicle.
22
24. Reinstall fascia, radiator cover, bolts and push
pins.
Be sure that ALL electrical connections
are plugged in properly and functioning
BEFORE installing the fascia.

