Owners manual

BX3833
2012 Volkswagen Passat SEL
Installation Instructions
405-0275 Page 4 of 7 4/25/12
1. Using a Torx 25 remove the three (3) screws that are located in the front area, underneath the
hood. There is one (1) screw located on the outer edge of the driver side and two (2) on the
passenger side. On the passenger side, one (1) is located on the outer edge and the other is
located just to the left of the center of the vehicle.
2. Remove the three (3) screws in the
front wheel well area using a Torx 25.
Do this on BOTH sides of the vehicle.
4. On the underside of the front fascia there are seven (7) screws that need to be removed using a
Torx 25. There are three (3) on both the driver side and the passenger side, plus one (1) in the
center of the vehicle.
3. Pull the wheel well liner back. Using a
Torx 25 remove the screw that is located
underneath. Do this on BOTH sides of the
vehicle.