Owners manual

BX3833
2012 Volkswagen Passat SEL
Installation Instructions
405-0275 Page 5 of 7 4/25/12
7. On the driver side, lift the tab up using a at
screwdriver and slide the temperature sensor
off. Set aside for reinstallation later.
5. Gently, yet rmly, pull outward on the front
fascia to remove. Next, remove headlights on
BOTH sides of the vehicle.
9. Place the baseplate under the bumper centering the slot on the bottom of the baseplate with the
existing hole in the bumper. Securely clamp the baseplate into postion. Take extra care on the
passenger side not to hit the lines. NOTE: If the horn is in the way, gently bend it outward.
6. Pull the styrofoam bumper padding off and
place to the side for reinstallation after the
baseplate is installed.
8. Cut straight across on the top of the plastic
tab. After the cut has been made, lift up and
remove the tab. Do this on BOTH sides.