Manual

Pender, Nebraska 68047 • Phone 402-385-3051 • Fax 402-385-3360 • www.blueox.com

AMBASSADOR

PINTLE

OPERATOR, PARTS, AND

INSTALLATION MANUAL

BX7302P

AMBASSADOR

PINTLE TOW BAR

For Utility Vehicle Applications

Class III (7,500 lb)

TO BE VALID, THE WARRANTY CARD MUST BE COMPLETED IN ITS ENTIRETY BY AN

AUTHORIZED DISTRIBUTOR OR DEALER AND SENT TO AUTOMATIC EQUIPMENT MFG.

CO., PENDER, NEBRASKA OR REGISTER ON-LINE AT www. blueox.us. FAILURE TO DO SO

WILL VOID THE WARRANTY.

292-2585 Page 1 of 3 9/17/08

PAGE 1
AMBASSADORTM PINTLE OPERATOR, PARTS, AND INSTALLATION MANUAL BX7302P AMBASSADORTM PINTLE TOW BAR For Utility Vehicle Applications Class III (7,500 lb) TO BE VALID, THE WARRANTY CARD MUST BE COMPLETED IN ITS ENTIRETY BY AN AUTHORIZED DISTRIBUTOR OR DEALER AND SENT TO AUTOMATIC EQUIPMENT MFG. CO., PENDER, NEBRASKA OR REGISTER ON-LINE AT www. blueox.us. FAILURE TO DO SO WILL VOID THE WARRANTY. © 2004 Blue Ox Division, Automatic Equipment Mfg. Co.
PAGE 2
SAFETY DO NOT INSTALL, OPERATE OR USE THIS EQUIPMENT UNTIL THE FOLLOWING OPERATING AND SAFETY INSTRUCTIONS HAVE BEEN READ AND UNDERSTOOD. This symbol is used to bring attention to safety precautions and instructions. When you see this symbol, be alert and pay attention to all instructions. YOUR PERSONAL SAFETY IS INVOLVED. Product Safety Policy Statement It is, and shall continue to be, a primary objective of Automatic Equipment Manufacturing Company to provide customers with safe and reliable products.
PAGE 3
Serial No. TOW BAR INSTALLATION 1. Blue Ox Tow Bars are designed for the pintel coupler to be parallel to the ground when it is attached to both the towed and towing vehicles. If the Tow Bar pintel coupler is at an angle, damage or an accident could occur. 2. Put Tow Bar leg ends between attachment tabs to align with tab holes and insert 1/2" pins through these holes. Insert quick clip into holes on 1/2" pin and flip ring to lock pin in place. 3.