Owners manual

ManualsBrandsBlue Ox ManualsFor the carBX7322

Pender, Nebraska 68047 • Phone 402-385-3051 • Fax 402-385-3360 • www.blueox.us

OPERATOR, PARTS, AND

INSTALLATION MANUAL

BX7322

ADVENTURER

Tow Bar

Class III (5000 lb) 2 Inch Ball Coupler

ADVENTURER

Serial No.

Page 1 of 5 292-1263 Rev. H 8/19/09

Summary of content (5 pages)

PAGE 1
Serial No. ADVENTURER® OPERATOR, PARTS, AND INSTALLATION MANUAL BX7322 ADVENTURER® Tow Bar Class III (5000 lb) 2 Inch Ball Coupler © 2003, 04, 07, 08, 09 Blue Ox Division, Automatic Equipment Mfg. Co. • One Mill Road, Industrial Park Pender, Nebraska 68047 • Phone 402-385-3051 • Fax 402-385-3360 • www.blueox.us Page 1 of 5 292-1263 Rev.
PAGE 2
SAFETY DO NOT INSTALL, OPERATE OR USE THIS EQUIPMENT UNTIL THE FOLLOWING OPERATING AND SAFETY INSTRUCTIONS HAVE BEEN READ AND UNDERSTOOD. This symbol is used to bring attention to safety precautions and instructions. When you see this symbol, be alert and pay attention to all instructions. YOUR PERSONAL SAFETY IS INVOLVED. 1. Blue Ox Tow Bars should be used with cars designed or modified to be towed. 2. Set the transmission for towing according to the owner's manual.
PAGE 3
SAFETY CABLE INSTALLATION SAFETY CABLE INSTALLATION Fig. 1 COUPLER FIT ADJUSTMENT Fig. 3 1. Using a 3/4" socket or wrench, tighten or loosen the nut until firm contact between coupler and ball is established. Perform adjustment when the coupler is in locked position. (Note: Bottom of coupler is shown above in Fig. 3) REFER TO #4 ON PAGE #2 FOR INFORMATION TO TIGHTEN 4 COUPLER BOLTS Ô Ô ÔÔ 16" TO 34" BETWEEN CENTERLINES Fig. 2 Fig. 4 F created with pdfFactory Pro trial version www.pdffactory.com 2.
PAGE 4
REPLACEMENT PARTS 3/4" Socket Tools Required 3/4" Wrench 9/16" Socket or 9/16" Wrench Parts List Ref. No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12* 13* 1 2 2 2 1 2 2 2 2 2 2 2 2 Part No. Description 229-0669 ......................................................................50 Deg. Ball Coupler, BX7322 61-3426 ...................................................................Wldm't, Tow Bar Attachment Lug 61-6001 ......................................................................................
PAGE 5
QUICK REFERENCE GUIDE HOOKING UP FOR TOWING UNHOOKING & FOLDING FOR STORAGE 1. Align vehicles in towing position with straight driveway ahead and parking brakes locked. 1. Park vehicles in a straight line on level surface. Apply towing vehicle parking brake. Place towed vehicle in park or 1st gear for manual transmissions. 2. Place ball coupler on 2 inch ball. Pin legs to attachment tabs. 3. Install safety cables and towed vehicle lighting. 4. Detailed instructions appear on pages 2-3. 2.