Manualshelf

Owners manual

ManualsBrandsBlue Ox ManualsAutomotiveTT2308 TigerTrak Stabilizing Track Bar Fits 62-06 Motorhome
123
405-0098 Rev. C Page 1 of 3 2/6/12
TigerTrak
TT2308 Instructions
Chevrolet C - Class G30 Series
Motor Home Chassis Rear Bar
TT2308
Each installation may vary due to chassis manufacturing options and variations in design. The rod assembly
may be installed in several different combinations, such as either front or rear of the supplied brackets as well
as using different bracket holes. The important thing is to maintain clearance between your TigerTrak and any
chassis component (moving and stationary) such
as exhaust, vehicle frame, differential, or any other
item which might interfere with the operation of this
product. Pictures and diagrams may not represent the
best installation for every application.
NOTICE
• Only a qualied mechanic using normal automotive tools and following all safety standards should
perform installation of this product.
• On earlier and lighter weight chassis models the sway bar brackets used 10MM nuts and bolts.
Some of the more recent models may already 12MM nuts and bolts installed. We strongly suggest
this hardware be replaced with the 12MM nuts and bolts that are included in the TigerTrak hardware
kit in order to adequately install the product. Please reference the torque chart.
• If the vehicle is equipped with air bags be sure that nothing interferes with the deployment of them.
Torque Specs
Use these torque specs unless otherwise specied.
Bolt Description Torque
Spec.
1/2 x 4.5 U-bolt 75 ft/lbs
1/2 x 1 1/2 USS GR. 8 95 ft/lbs
1/2 x 2 USS GR. 8 95 ft/lbs
1/2 x 2 1/2 USS GR. 8 95 ft/lbs
1/2 x 3 USS GR. 8 95 ft/lbs
1/2-13 x 1 SQ. Set Screw 75 ft/lbs
1/2 x 1 1/4 SAE GR. 5 80 ft/lbs
5/8 x 2 SAE GR. 8 150 ft/lbs
5/8 x 2 3/4 SAE GR. 8 150 ft/lbs
5/8 x 1 1/4 SAE GR. 5 200 ft/lbs
3/4 x 3 SAE GR. 5 150 ft/lbs
3/4 x 3 1/2 SAE GR. 5 150 ft/lbs
3/4 X 5 SAE GR. 5 150 ft/lbs
12-1.75 x 55 MM HEX 10.9 65 ft/lbs
12-1.75 x 120 MM HEX 10.9 65 ft/lbs
12-1.75 MM HEX NUT 10.9 65 ft/lbs
14-2.0 x 40 MM HEX 10.9 125 ft/lbs
14-2.0 x 80 MM HEX 10.9 125 ft/lbs
Tools Required
1-1/8” Combo Wrench
3/4” Combo Wrench
3/4” Socket
1-1/18” Socket
7/8” Socket
15/16” Socket
1/2” Drive Ratchet
1/2” x 6’ Extensions
Torque Wrench

Summary of content (3 pages)