Manual

30
Specicationssubjecttochange.Seewww.bluesea.comforcurrentinformation.
29
Tank Conguration (continued)
TherearetwowaystocalibratetankswiththeVSM422:RectangularCali-
brationandAutoCalibration.Rectangulartanksaretankswheretheshapeof
thetankdoesnotchangebasedontheheight.AutoCalibrationisidealifa
non-rectangulartankisbeingused.UseeitherRectangularorAuto
Calibrationtocompletetankconguration.
Makesurethatthetanksensorisproperlyadjustedforthetankdepth.For
ultrasonicsensorsthismeanssettingthetankdepth.
Followtankcongurationsteps1–13onpages25–27fortanksetup.
Thenusethestepsbelowtocalibrateforarectangulartank.Thesteps
belowarenotrequiredifthemonitorwillbedisplayingthetankinpercent.
1.ScrolltoanpressSELECT on Set Tank Capacity
2.SettankvolumeusingtheCharacterSelectionmethod.(page13)
3.PressEXIT.
4.PressEXIT.
5.RepeatTankSetupstartingwithstep3forallremainingtanks.
Tank Conguration (Rectangular Calibration)
Specicationssubjecttochange.Seewww.bluesea.comforcurrentinformation.