Brochure
SPLIT BUS FUSE BLOCK
ST Blade
Split Bus Fuse Block
with ground for use
when a mix of switched
and 24-hour circuits are
desired in the same block
• Provides two isolated groups of six
ATO®/ATC® circuits
• For use with either two isolated batteries or with
a single battery providing a mix of 24 hour and
switched circuits
• Screw terminals for securing wires accept
ring terminals
• One-piece stainless flange nuts ensure safe and
secure connections for primary feed wires
• Clear insulating cover with label recesses and
storage for two fuses, satisfies ABYC/USCG
insulation requirements
• Tin-plated copper buses and fuse clips
• Fuses sold separately
5032
Labels not included. Shown with
Blue Sea Systems' Small Format Labels
and 1 Large Format Label
Related Products
ATO® or ATC® Fuses
p. 39
easyID ATC® Fuses
p. 39
Pump
Clock
Alarm
24-HOUR
Radio
GPS
SWITCHED
Cabin Lights
Switch
FROM DEVICE
NEGATIVE
FROM BATTERY
NEGATIVE