Specifications

13
Operation
Description of the Controls (E43E and E44E)
Control Panel Functions
Each control panel comprises the following:-
One 4 digit, seven segment display with a 0.5” high, bright green LED display.
Three green LED indicator lights located under each of the 3 Timer Controls.
6 Touch Control Keys;-
‘ON’ / ’OFF’ Key.
Programme Key (P).
Left Timer - ‘UP’ Key and LED indicator light.
Centre Timer - and LED indicator light.
Right Timer - ‘DOWN’ Key and LED indicator light.
Temperature Key (Thermostat).
Modes of Operation
The Fryer has the following Modes of Operation:-
• Power Up Mode.
• Melt Cycle Modes (Programmable in the Programming Mode).
• Idle Mode.
• Cook Mode.
• Temperature Display Mode.
Refer to the ‘Operation of the Appliance’ information for further details.
For Controller Programming refer to the 'System Programmable Default Settings' in the ‘Controller
Programming’ section at the rear of this manual, to access the following options:-
Basic Programming Mode.
- Programming the Password Protection - (Unlock Lock).
- Programming the Timers.
- Programming the Temperature.
Advanced Programming Mode.
- Timing Mode (straight or flexi time cooking).
- Temperature Offset (calibration setting) - 14 to +14°.
- Temperature Display Mode Setting (Temp display or prompt display).
- Programming the Melt Cycle.
- Setting the Temperature Units (either °C or °F).
The 3 Timer keys on each control
panel can be used to program 3
different cook times for each tank.
NOTE: Only one temperature
setting applies to all 3 timers.
ON/OFF