Specifications

30
Controller Basic Programming Mode
Controller Basic Programming Mode:
NOTE:
• 'Timer 1', 'Timer 2' and ‘Timer 3' keys on each control panel can be programmed with 3
different cook times for each tank.
• The user may not enter Programming Mode whilst a timer is running. An alarm will sound
indicating the key press, but the unit will not enter the Programming Mode.
1. To enter the ‘Programming Mode’, press the ‘ON /
OFF’ key to turn ‘ON’ the appliance.
2. Repeatedly press the Programme ‘P’ key to cycle
through the programs to the program to be changed.
a. If ‘LoC’ is displayed, password protection is turned
‘ON’, the control panel is locked which will prevent
any change to the operating mode. To unlock the
control panel, refer to 'Programming the Password
Protection' below.
Programming the Password Protection
1. To unlock the display, enter the password by
pressing, 'Timer 1', 'Timer 1', 'Timer 3', 'Timer 3'.
‘ULoC’ will be displayed.
NOTE: If the password is not entered within 6
seconds, the appliance will return to the Idle
Mode.
2. To change the ‘Password Protection’ press either
'Timer 1 - Up’ key or 'Timer 3 - Down' key.
3. The user may select from;
a. ‘Loc’ (Password protected).
Or
b. ‘ULoc’ (No password protection).
4. Press the Programme Key ‘P’, the change will be
accepted and the display will step on to the next
parameter.
O R