Specs

2598 Fortune Way, Suite K • Vista, CA 92081, USA
800-493-7877 • 760-597-1642 • Fax [phone]
www.blueskyenergyinc.com
Covered under one or more of the following US Patents
6,111,391• 6,204,645
e IPN-Remote display provides basic monitoring for Blue Sky
Energy’s IPN compatible charge controllers. e unit displays
battery voltage, output current and charge control system status for
up to 8 charge controllers on a single IPN network.
A bright crisp low power LED display is used to provide excellent
readability in any lighting. e Charge Status indicator displays
present charge control system status, and shows relative battery
state of charge.
e versatile IPN-Remote shows battery voltage as measured by the
charge control system. When the battery is being charged the
display toggles between battery voltage and charge controller
output current. e current display can be congured to show the
total output current from all controllers on the IPN network, or the
output current from a particular controller. Multiple IPN-Remote
displays can be placed on a single IPN network even if an
IPN-ProRemote Display is already present.
What Is e IPN Network ?
e Integrated Power Net™, or IPN network is a simple yet robust
digital network which allows Blue Sky Energy’s IPN compatible
products to communicate with each other and work together.
Without the IPN network multiple charge controllers charging a
common battery would operate as separate machines, each with
their own charge parameters, display, and so on. While IPN
compatible charge controllers work quite well alone, when multiple
IPN controllers are combined they no longer behave as separate
machines. ey work together and operate as a single machine. Up
to 8 IPN compatible controllers can reside on a single network
without special communication hardware. One controller is the
master and the others are slaves. Charge parameters are set only in
the master, and the slaves automatically take on these settings and
work with the master to behave as a single charge control machine.
SPECIFICATIONS
Accuracy
Power Consumption
0.15W Typical
Display
Panel Dimensions
Communication,
Power & Cabling
Environmental
Accuracy determined by IPN charge controller(s)
Requires IPN network compatible Charge Controller.
Receives communication and power from charge
controller via standard 4-pin telephone cable.
Charge Controller cable length to 1000’ (305m) with
proper cabling. Eight units maximum on an IPN network.
3-Digit • 0.30” Low Power LED
2
1/2
”H x 3”W x 1
1/8
”D (6.3cm x 7.6cm x 2.8cm)
-40 – +40°C, 10 – 90% RH non-condensing
As a part of our continuous improvement process specications are subject
to change without prior notice.
• Displays Battery Voltage and Output Current
For IPN Compatible Charge Controllers
• Low Power LED display Provides Excellent
Readability
• Can Display Output Current of a Single
Controller, Or Total Current Of All IPN
Networked Controllers
• Conformal Coated To Resist Corrosion
• Full 12 Month Limited Warranty, Optional
Extended Coverage Available
440-0021 C
IPN-RemoteIPN-Remote
The IPN-Remote display provides an easy
to use basic display for IPN compatible
charge controllers.
Low Cost IPN Compatible Charge Controller Display