BLUETOOTH FM CAR KIT Blue Sky 5001 USER GUIDE [Overview] We would like to congratulate you for choosing the BlueSky handsfree car kit. We have taken numerous measures in quality control to ensure that you product arrives in perfect condition. In the event that your BlueSky unit contains a damaged or missing item, does not perform as specified or requires warranty, please contact your retail store. The store will exchange your unit for a new one upon presentation of the original sales receipt.
This versatile Bluetooth FM Transmitter Car Kit model Blue Sky 5001 is designed for hands free wireless communication while driving. The BSky 5001 also has an additional FM function which can play music from your cellular phone, IPOD, or MP3, and send voice to your car speakers via a wireless transmitter. The Bluetooth headset can be easily removed and used independently.
Working Current: Battery: Audio Input: Working Temperature: 2.5MA Rechargeable Lithium Polymer Ion ∮2.5mm jack for Audio Input -15~50 degrees [Getting to know the Blue Sky 5001] 1. Function Principle: This product is designed for use in a car, where a charging source (DC12V) and a FM radio transmission are available. Make sure the FM frequency of the kit is the same as the car FM radio when operating. 2. FM Function Mode: Two optional FM transmitting modes, Mode R and Mode B.
mode has been changed; 5) The last mode and the FM frequency will be memorized in the host. [Detailed Operating Guide] 1.Power On and Off When the BSky 5001 unit is on the OFF mode, press the multifunction key on the headset and hold it down for 5 seconds. The blue LED will start to flash three times. The device can automatically connect to the last used mobile phone after powering on. When the BSky 5001 is under the STANDBY mode, press the multifunction key and hold it down for 5 seconds.
Tips: 1.The Bluetooth connection of one of the mobiles will be disconnected while the other one is receiving a call, and will be automatically reconnected when the call has ended. 2.After pairing, it can automatically connect to most mobile phones but not with all models. Please select “connecting” from your mobile phone’s Bluetooth menu to connect to the BSky 5001. (If it doesn’t connect with your mobile, the blue LED will show short flashes every 2 seconds).
6.Voice Dialing If your mobile phone is voice dialing enabled, under the STANDBY mode, press the multifunction key once then say the voice tag. Note: Please make sure to record the voice tag into the mobile phone before using this function. Functionality varies depending on the mobile phone models. Please refer to your mobile phone user guide for additional information. 7.
Note: The red LED is on during charging and off until the charging completed. The charging time is about 3 hours, depending on the battery status. [Conditions of Warranty] If during the One [1]year warranty period your new product is found to be defective,Blue Sky Tech Inc. will repair such defect or replace the product without charge for parts or labor subject to the following conditions: 1.All repairs must be performed by Blue Sky Tech Inc. 2.