User guide

mode has been changed;
5) The last mode and the FM frequency will be memorized in the host.
[Detailed Operating Guide]
1.Power On and Off
When the BSky 5001 unit is on the OFF mode, press the multifunction key on the
headset and hold it down for 5 seconds. The blue LED will start to flash three times.
The device can automatically connect to the last used mobile phone after powering
on.
When the BSky 5001 is under the STANDBY mode, press the multifunction key and
hold it down for 5 seconds. The red indicator will flash 4 times indicating the device
is off.
2.Pairing and Connecting
Under the power OFF state, press the multifunction key and hold it down for 5
seconds, until the red and blue indicators flash alternately, indicating the device
is ready for pairing.
1. Activate two
Bluetooth mobile phones and search for Bluetooth devices. The
devices in range will be found after searching is completed;
2. Select “BSky 5001”on one of the mobile phones, and enter “0000” for pairing.
The blue indicator flashes when connected successfully;
3. Press the multifunction button once, the red and blue indicator will flash
alternately, indicating it is ready for pairing again;
4. Activate the other mobile phone and follow the same steps to pair it with the
device(Depending on the brand, the first mobile phone could lose connection
when the second phone receives a call. Do not restart the whole process, just
re-enable the Bluetooth connection)
.
5. Now the device has been paired with two mobile phones successfully. The blue
indicator will flash every 5 seconds. Now you can enjoy wireless communication.