User guide

Note: The red LED is on during charging and off until the charging completed. The
charging time is about 3 hours, depending on the battery status.
[Conditions of Warranty]
If during the One [1]year warranty period your new product is found to be
defective,Blue Sky Tech Inc. will repair such defect or replace the product without
charge for parts or labor subject to the following conditions:
1.All repairs must be performed by Blue Sky Tech Inc.
2.The equipment must not have been altered or damaged through
negligence,accident or improper operation.
All warranty claims must be accompanied by a copy of the sales receipt.
Important:
1. Prior to using the BSky 5001 for the first time, please fully charge it until the red
LED is off to make sure the device will have the best performance.
2. Place your mobile phone and the BSky 5001 within 1 meter for pairing.
3. Ensure your mobile phone and the BSky 5001 are within 10 meters otherwise the
connection will be lost and will need to be re-connected.
4. If the pairing cannot be completed within 5 minutes after the pairing mode is
activated, the BSky 5001 will not go OFF. Please check your mobile phone’s
Bluetooth status, and repeat the steps under “pairing” within an effective distance.
5. Keep the volume at a reasonable level in order to avoid imparing hearing acuity and
creating echo.
6. Do not expose the BSky 5001 to liquid, moisture, or humidity; Do not use abrasive
cleaning solvents to clean it as it is not waterproof. Placing it in high temperature may
result in an explosion. Store it in a dry and room temperature environment.
7. Check local laws regarding the use of a mobile phone and the hands free feature
while driving. If you use the BSky 5001 while driving, ensure your attention and
focus remain on you responsibility of driving safely.