IPN-ProRemote IPN™ network compatible charge controller and battery system monitor INSTALLATION AND OPERATION MANUAL CONFORMS TO EN 61326-1:2006 EN 60335-1:2002 + A11:2004 + A1:2004 EN 60335-2-29:2004 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operations.
Blue Sky Energy – IPN-ProRemote TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ................................................................................................................................ 2 PRODUCT DESCRIPTION...................................................................................................................................................... 2 Part Numbers and Options.........................................................................................................
Installation and Operation Manual IMPORTANT SAFETY INSTRUCTIONS This manual contains important instructions for Models IPNPRO and IPNPRO-S SAVE THESE INSTRUCTIONS 1. Refer installation and servicing to qualified service personnel. Incorrect installation or use may result in risk of electric shock or fire. No user serviceable parts in this unit. 2.
Blue Sky Energy – IPN-ProRemote DISPLAY PANEL FIGURE 1 OPERATION All IPN-ProRemote operations and displays are controlled with the three function keys, BACK, NEXT and SELECT. Information typically of interest to the casual user such as battery voltage, net battery current and remaining battery capacity are available in the Top menu.
Installation and Operation Manual LCD DISPLAY AND BACKLIGHT The Liquid Crystal Display (LCD) may be backlit for improved readability. Switching backlight ON increases IPN-ProRemote power consumption from roughly 0.25W to 1.0W. Backlight can be set for ON, OFF or AUTO from the Advanced Setup menu. The default setting of AUTO will cause backlight to remain ON for one minute following the last key press.
Blue Sky Energy – IPN-ProRemote Accuracy Remaining Battery Capacity will tend to be better if; • The charge controller delivers at least 3 amps per 100 amp-hours of battery capacity. • The charge controller is what normally brings the battery back to full charge. • The battery is fully charged by the charge controller often to minimize error build up resulting from the non-ideal characteristics of batteries. The more the battery is cycled without becoming fully charged, the greater the error buildup.
Installation and Operation Manual ADVANCED DISPLAY Menu From Top menu Days since last full charge or equalize. The equalize day counter resets upon commencing equalize. LAST FULL CHARGE 10 DAYS AGO Day counter accuracy is +1 / -0 days as day counter transitions occur following each 24 hour period from when battery power was applied. Consider applying battery power late in the evening to improve counter accuracy. Maximum range is 255 days which is also shown if days are unknown.
Blue Sky Energy – IPN-ProRemote SETUP Menu From Advanced Display menu Total battery amp-hours at 25°C, 20hr rate. With charge efficiency set to 94%, battery is expected to retain 94 amp-hours for each 100 amp-hours of charge. With charge efficiency mode set to FIXED, charge efficiency value remains as set. If set to AUTO ADJUST it automatically adjusts based on actual charge efficiency to continuously improve remaining battery capacity accuracy.
Installation and Operation Manual BATTERY CHARGE PARAMETERS Menu From Setup menu Sets Acceptance charge voltage setpoint. Range 10.0 to 80.0V. SET ACCEPT CHG 14.4V SEL► Sets Float charge voltage setpoint. Range 10.0 to 80.0V. SET FLOAT CHG 13.4V SEL► Sets Equalize voltage setpoint. Range 10.0 to 80.0V. SET EQUALIZ CHG 15.2V SEL► Sets Equalize time. Range 0.5 to 10 hours. SET EQUALIZ TIME 2.0HRS SEL► Sets days between automatic Equalize. Range is 10 to 400 days.
Blue Sky Energy – IPN-ProRemote USING THE MENUS AND KEYS Moving through the menus, functions and changing settings is consistent throughout all functions and screens. The following example illustrates typical operation. Example – Setting Battery Amp-Hours (to 440 amp-hours in this example) Screen shown BATTERY VOLT/AMP 12.6V +25.0A ENTER ADVANCED DSPLY/SETUP SEL► Action taken to move to next screen or step Press NEXT 6 times to move down to Advanced Display/Setup select screen.
Installation and Operation Manual IPN-ProRemote SETUP ¾ The IPN-ProRemote has various setup parameters all of which are preconfigured at the factory. Most installations require no setup changes other than increasing Acceptance Charge Time to 4 hours, and entering actual battery Amp-Hours and Self Discharge Rate. Factory default settings shown below reside in the IPN-ProRemote. All other settings shown in the Setup and Battery Charge Parameters menus reside in the charge controller.
Blue Sky Energy – IPN-ProRemote Float Transition Current “Time in Acceptance” is an accepted method to determine when the battery is fully charged if net charge current is unknown. A preferred method provided by the IPN-ProRemote is to use net battery charge current matched to battery size in amp-hours.
Installation and Operation Manual CURRENT SHUNT ¾ CAUTION: A 500A/50mV current shunt must be used with the IPN-ProRemote. The shunt is used to measure net battery current and must be installed in series with battery negative. Damage caused by installation in series with battery positive will void the limited warranty.
Blue Sky Energy – IPN-ProRemote ¾ When Backlight is on, the IPN-ProRemote can draw up to 100mA from the charge controller. For proper operation of the shunt current measurement circuits, total voltage difference between the IPN-ProRemote circuit common and the shunt must be kept to less than ±1.0V when Backlight is on and maximum charge or discharge current is flowing in the system.
Installation and Operation Manual SYMPTOM No data shows in the View Charge Unit Status screen PROBABLE CAUSE Charge controller not communicating with IPN-ProRemote Days since last equalize or full charge shows 1 day too many Days since last equalize reset without equalize completing Net battery current polarity reversed Battery current seems inaccurate The day counter increments once each 24 hours since battery power was applied.
Blue Sky Energy – IPN-ProRemote SPECIFICATIONS SPECIFICATIONS Current Shunt Battery Ammeter IPN-ProRemote 50 mV / 500 amp Range ±773.3A FS • Accuracy ±0.5% FS 20 – 10,000 Amp-hours 0.25W Typical • 1.
Installation and Operation Manual IPN-ProRemote Controlador de carga compatible con red IPN™ y monitor de sistema de baterías MANUAL DE INSTALACIÓN Y OPERACIÓN CONFORME A EN 61326-1:2006 EN 60335-1:2002 + A11:2004 + A1:2004 EN 60335-2-29:2004 Este dispositivo cumple con la parte 15 de las reglas de FCC.
Blue Sky Energy – IPN-ProRemote TABLA DE CONTENIDOS INSTRUCCIONES DE SEGURIDAD IMPORTANTES ........................................................................................................... 18 DESCRIPCIÓN DEL PRODUCTO .......................................................................................................................................... 18 Números de parte y opciones ...................................................................................................................
Installation and Operation Manual INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este manual contiene instrucciones importantes para los modelos IPNPRO E IPNPRO- S CONSERVE ESTAS INSTRUCCIONES 1. Deje la instalación y las reparaciones en manos de personal de servicio calificado. La instalación o uso incorrecto puede resultar en riesgo de descarga eléctrica o fuego. No hay partes reparables por el usuario en esta unidad. 2.
Blue Sky Energy – IPN-ProRemote PANEL DEL VISOR FIGURA 1 OPERACIÓN Todas las operaciones del IPN-ProRemote y las pantallas son controladas por medio de las tres teclas de funciones: BACK (anterior), NEXT (siguiente) y SELECT (seleccionar). La información que típicamente resulta de interés para el usuario casual, tal como el voltaje de la batería, la corriente de la red de baterías y la capacidad remanente de batería está disponible en el menú superior.
Installation and Operation Manual VISOR DE LCD Y RETROILUMINACIÓN El visor de cristal líquido (LCD) puede ser retroiluminado para mejorar la legibilidad. Al encender la retroiluminación (ON) se incrementa el consumo de energía del IPN-ProRemote en aproximadamente 0.25W a 1.0W. La retroiluminación puede ajustarse a encendida ON, apagada OFF o AUTO desde el menú de configuración avanzada.
Blue Sky Energy – IPN-ProRemote Precisión La capacidad remanente de batería tenderá a ser mejor si: • El controlador de carga provee al menos 3A por cada 100 Amp-horas de capacidad de batería. • El controlador de carga es el que normalmente hace retornar a la batería a la condición de carga completa. • La batería es cargada completamente por el controlador de carga en forma frecuente para minimizar la acumulación de errores resultantes de las características no ideales de las baterías.
Installation and Operation Manual MENÚ DE VISOR AVANZADO Del menú superior Días desde la última carga completa o ecualización. El contador de días de ecualización se reinicia al comenzar la ecualización. LAST FULL CHARGE 10 DAYS AGO La precisión del contador de días es de +1 / -0 días dado que las transiciones de días del contador suceden a continuación de cada período de 24 horas desde que haya sido aplicada energía a la batería.
Blue Sky Energy – IPN-ProRemote Menú de configuración DelAdvanced menú de visor avanzado Display Con la eficiencia ajustada al 94%, se espera que la batería retenga 94 Amp-horas por cada 100 Amp-horas de carga. Con el modo de eficiencia de carga ajustado a fijo (FIXED), el valor de eficiencia de carga permanece como fue ajustado.
Installation and Operation Manual MENÚ DE PARÁMETROS DE CARGA DE BATERÍA Del menú de configuración Ajusta la configuración del voltaje de carga de aceptación. Rango de 10.0 a 80.0V. SET ACCEPT CHG 14.4V SEL► Ajusta la configuración del voltaje de carga de flotación Rango 10.0 a 80.0V. SET FLOAT CHG 13.4V SEL► Ajusta la configuración del voltaje de ecualización. Rango de 10.0 a 80.0V. SET EQUALIZ CHG 15.2V SEL► Ajusta el tiempo de ecualización. Rango de 0.5 a 10 horas. SET EQUALIZ TIME 2.
Blue Sky Energy – IPN-ProRemote USO DE LOS MENÚS Y LAS TECLAS La forma de moverse a través de los menús, funciones y cambiar ajustes es constante a través de todas las funciones y pantallas. El siguiente ejemplo ilustra la operación típica. Ejemplo – Configuración de los Amp-horas de batería (a 440 Amp-horas en este ejemplo) Pantalla exhibida Acción tomada para moverse a la siguiente pantalla o paso BATTERY VOLT/AMP 12.6V +25.
Installation and Operation Manual Configuración del IPN-ProRemote ¾ El IPN-ProRemote tiene varios parámetros de configuración, todos ellos son preconfigurados en la fábrica. La mayoría de las instalaciones no requieren cambios en la configuración que no sean el incremento del Tiempo de carga Acceptance Charge Time a 4 horas y el ingreso de los Amp-horas y el régimen de auto descarga Self Discharge Rate reales. Los valores de fábrica que se muestran a continuación residen en el IPN-ProRemote.
Blue Sky Energy – IPN-ProRemote Corriente flotante de transición El tiempo en aceptación “Time in Acceptance” es un método aceptado para determinar cuándo la batería está cargada completamente si se desconoce la corriente de carga de la red. Un método preferido provisto por el IPN-ProRemote es usar una corriente de red de carga de batería que coincida con el tamaño de la batería en Amp-horas.
Installation and Operation Manual DERIVACIÓN DE CORRIENTE ¾ PRECAUCIÓN: Debe usarse un derivador de corriente de 500A/50mV con el IPN-ProRemote. El derivador es usado para medir la corriente de batería de la red y debe ser instalado en serie con el negativo de la batería. Los daños causados por la instalación en el positivo de la batería harán caducar la garantía limitada.
Blue Sky Energy – IPN-ProRemote ¾ Cuando la retroiluminación está encendida, el IPN-ProRemote puede consumir hasta 100mA del controlador de carga. Para una operación apropiada de los circuitos de medición de corriente por derivación, la diferencia de voltaje total entre el común del circuito del IPN-ProRemote y el derivador debe ser mantenida en menos de ±1.0V cuando la retroiluminación esté encendida y esté fluyendo una corriente de carga o descarga máxima en el sistema.
Installation and Operation Manual No aparecen datos en la pantalla de estado de unidad de carga “View Charge Unit Status” El controlador de carga no se está comunicando con el IPNProRemote Los días desde la última ecualización o carga completa indican 1 día a mas El contador de días se incrementa una vez cada 24 horas desde que se aplicó la alimentación de batería.
Blue Sky Energy – IPN-ProRemote ESPECIFICACIONES ESPECIFICACIONES Derivador de corriente Amperímetro de batería IPN-ProRemote 50 mV / 500 A Rango ±773.3A a fondo de escala • Precisión ±0.5% a fondo de escala 20 – 10,000 Amp-horas 0.25W típicos • 1.0W típicos con retroiluminación encendida Tamaño de la batería Consumo de energía Basado en el conteo de Amp-horas • Compensado en temperatura por factores apropiados.
Installation and Operation Manual IPN-ProRemote Contrôleur de système de batterie et de régulateur de charge compatible IPN™ MANUEL D'INSTALLATION ET D'UTILISATION CONFORME À EN 61326-1:2006 EN 60335-1:2002 + A11:2004 + A1:2004 EN 60335-2-29:2004 Cet appareil est conforme à la partie 15 des règles FCC.
Blue Sky Energy – IPN-ProRemote TABLE DES MATIÈRES INSTRUCTIONS DE SÉCURITÉ IMPORTANTES ................................................................................................................. 34 DESCRIPTION DU PRODUIT................................................................................................................................................. 34 Références des pièces et options .......................................................................................................
Installation and Operation Manual INSTRUCTIONS DE SÉCURITÉ IMPORTANTES Ce manuel contient des instructions importantes pour les modèles IPNPRO et IPNPRO-S CONSERVER CES INSTRUCTIONS 1. Confier l'installation et l'entretien à du personnel qualifié. Une installation ou utilisation incorrecte présente un risque de décharge électrique ou d'incendie. L'appareil ne contient aucune pièce réparable par l'utilisateur. 2.
Blue Sky Energy – IPN-ProRemote FAÇADE DE L'AFFICHEUR FIGURE 1 FONCTIONNEMENT Toutes les opérations et tous les affichages de l'IPN-ProRemote se contrôlent au moyen des trois de touches de fonction BACK, NEXT et SELECT. Les données qui intéressent normalement l'utilisateur courant telles que la tension de batterie, l'intensité de batterie nette et la capacité de batterie restante sont accessibles depuis le menu supérieur (Top).
Installation and Operation Manual AFFICHEUR LCD ET RÉTROÉCLAIRAGE L'afficheur à cristaux liquides (LCD) peut être rétroéclairé pour améliorer la lisibilité. Le rétroéclairage augmente la consommation électrique de l'IPNProRemote de 0,25 W à 1,0 W environ. Le rétroéclairage peut être réglé sur ON (allumé), OFF (éteint) ou AUTO depuis le menu Advanced Setup. Le réglage par défaut est AUTO, qui maintient le rétroéclairage allumé pendant une minute après qu'une touche est actionnée.
Blue Sky Energy – IPN-ProRemote Précision La capacité restante de la batterie tend à être plus exacte si : • Le régulateur de charge fournit au moins 3 A par 100 Ah de capacité de la batterie. • Le régulateur est le dispositif qui ramène normalement la batterie à sa pleine charge. • La batterie est complètement rechargée par le régulateur de charge de façon fréquente afin de minimiser l'erreur cumulée résultant de caractéristiques non idéales des batteries.
Installation and Operation Manual Menu ADVANCED DISPLAY (affichage avancé) Depuis le menu Top Nombre de jours depuis la dernière pleine charge ou égalisation. Le compteur de jours d'égalisation se remet à zéro au début de l'égalisation. LAST FULL CHARGE 10 DAYS AGO Le compteur de jour est exact à +1 / -0 jour près car les transitions du compteur se produisent au bout de chaque période de 24 heures depuis le moment où la tension de la batterie est appliquée.
Blue Sky Energy – IPN-ProRemote Menu SETUP (configuration) Depuis le menu Adanced Display Capacité totale de la batterie à 25°C, taux en 20 h. Si le rendement de charge est fixé à 94 %, la batterie est supposée retenir 94 Ah pour 100 Ah de charge qui lui est fournie. Si le mode de rendement de charge est réglé sur FIXED, le rendement de charge reste sur la valeur choisie.
Installation and Operation Manual Menu BATTERY CHARGE PARAMETERS (paramètres de charge de la batterie) Depuis le menu Setup Tension de consigne de la charge à capacité (Acceptance). Plage de 10,0 à 80,0 V. SET ACCEPT CHG 14.4V SEL► Tension de consigne de la charge d'entretien (Float). Plage de 10,0 à 80,0 V. SET FLOAT CHG 13.4V SEL► Tension de consigne d'égalisation (Equalize). Plage de 10,0 à 80,0 V. SET EQUALIZ CHG 15.2V SEL► Réglage de la durée d'égalisation. Plage de 0,5 à 10 heures.
Blue Sky Energy – IPN-ProRemote UTILISER LES MENUS ET LES TOUCHES La navigation à travers les menus, les fonctions et les réglages est uniforme sur l'ensemble des fonctions et écrans. L'exemple suivant illustre une utilisation typique. Exemple – Réglage de la capacité de la batterie (sur 440 ampères-heures dans cet exemple) Écran affiché Action exécutée pour passer à l'écran ou à l'étape suivante BATTERY VOLT/AMP 12.6V +25.
Installation and Operation Manual CONFIGURATION DE L'IPN-ProRemote ¾ L'IPN-ProRemote présente divers paramètres de configuration qui sont tous fixés initialement à l'usine. La majorité des installations ne nécessite aucun changement de configuration autre que l'augmentation de la durée de charge à capacité jusqu'à 4 heures et la saisie de la capacité (Ah) réelle et du taux d'autodécharge de la batterie. Les réglages d'usine par défaut indiqués cidessous sont stockés dans l'IPN-ProRemote.
Blue Sky Energy – IPN-ProRemote Intensité de transition d'entretien La « durée en charge à capacité » est une méthode acceptée pour déterminer le moment où la batterie est complètement chargée si l'intensité de charge nette n'est pas connue. Une méthode préférable offerte par l'IPN-ProRemote consiste à utiliser l'intensité de charge nette de la batterie en correspondance avec la capacité de charge de la batterie (Ah).
Installation and Operation Manual SHUNT DE COURANT ¾ ATTENTION : Un shunt de courant de 500 A/50 mV doit être utilisé avec l'IPN-ProRemote. Ce shunt sert à mesurer l'intensité de batterie nette et doit être posé en série sur le moins de la batterie. Les dommages résultant de la pose en série sur le plus de la batterie annulent la garantie limitée.
Blue Sky Energy – IPN-ProRemote ¾ Lorsque le rétroéclairage est allumé, l'IPN-ProRemote tire jusqu'à 100 mA du régulateur de charge. Pour assurer un bon fonctionnement des circuits de mesure du courant de shunt, l'écart de tension total entre le commun et la borne de shunt de l'IPN-ProRemote doit être maintenu inférieur à ±1,0 V lorsque le rétroéclairage est allumé et qu’un courant de charge ou décharge maximum circule dans le circuit.
Installation and Operation Manual SYMPTÔME Aucune donnée affichée dans l'écran View Charge Unit Status CAUSE PROBABLE Le régulateur de charge ne communique pas avec l'IPN-ProRemote POINTS À EXAMINER OU À CORRIGER Le câble de réseau de régulateur à régulateur n'est pas câblé A sur A, B sur B, ou des fils sont en circuit ouvert ou en court-circuit.
Blue Sky Energy – IPN-ProRemote CARACTÉRISTIQUES TECHNIQUES CARACTÉRISTIQUES TECHNIQUES Shunt de courant Ampèremètre batterie IPN-ProRemote 50 mV / 500 A Plage ±773,3 A pl. éch.• Précision ±0,5 % pl. éch 20 à 10 000 Ah 0,25 W typ. • 1,0 W typ.
Installation and Operation Manual IPN-ProRemote IPN™ Netzwerkkompatibler Laderegler und Batteriesystem-Monitor INSTALLATION UND BEDIENERHANDBUCH ERFÜLLT EN 61326-1:2006 EN 60335-1:2002 + A11:2004 + A1:2004 EN 60335-2-29:2004 Dieses Gerät erfüllt Abschnitt 15 der FCCBestimmungen.
Blue Sky Energy – IPN-ProRemote INHALTSVERZEICHNIS WICHTIGE SICHERHEITSANWEISUNGEN .......................................................................................................................... 50 PRODUKTBESCHREIBUNG.................................................................................................................................................. 50 Teilenummern und Optionen.............................................................................................................
Installation and Operation Manual WICHTIGE SICHERHEITSANWEISUNGEN Dieses Handbuch enthält wichtige Answeisungen für die Modelle IPNPRO und IPNPRO-S. BEWAHREN SIE DIESE HINWEISE SICHER AUF. 1. Überlassen Sie die Installation und Wartung qualifiziertem Wartungspersonal. Eine falsche Installation oder Anwendung kann zu Stromschlägen und Feuer führen. Dieses Gerät enthält keine zu wartenden Teile. 2. Die folgenden Symbole dienen zum Kennzeichnen von Gefahrensituationen bzw.
Blue Sky Energy – IPN-ProRemote Informationen im Menü "Advanced Display“ (fortgeschrittene Anzeigen) sehen, während bei der Installation möglicherweise der Zugriff auf die Menüs „Setup“ (Konfiguration) und „Battery Charge Parameters“ (Batterieladeparameter) erforderlich werden kann. Siehe die Abbildung 2, 3, 4 und 5 für eine komplette Beschreibung aller Anzeigebildschirme.
Installation and Operation Manual LCD-ANZEIGE UND HINTERGRUNDBELEUCHTUNG Der Hintergrund der Flüssigkeitskristallanzeige (LCD) kann zur besseren Lesbarkeit beleuchtet werden. Durch das Einschalten der Hintergrundbeleuchtung erhöht sich der Leistungsverbrauch des IPN-ProRemote von etwa 0,25 W auf 1,0 W. Die Hintergrundbeleuchtung kann im Menü "Advanced Setup“ (fortgeschrittene Konfiguration) auf ON (EIN), OFF (AUS) oder AUTO (AUTOMATISCH) geschaltet werden.
Blue Sky Energy – IPN-ProRemote Genauigkeit Der Wert für „Remaining Battery Capacity“ (verbleibende Batterieladekapazität) neigt zu besserer Genauigkeit, wenn • der Laderegler mindestens 3 A pro 100 Ah Batterieladekapazität liefert, • der Laderegler normalerweise die Batterie wieder vollständig auflädt und • • die Batterie vom Laderegler oft voll aufgeladen wird, um somit die von nicht idealen Batteriekenndaten resultierende Fehlersummierung zu minimieren.
Installation and Operation Manual Menü “ADVANCED DISPLAY“ (fortgeschrittene Anzeigen) Vom Hauptmenü LAST FULL CHARGE 10 DAYS AGO Zeit seit der letzten vollständigen bzw. Abgleichladung. Der Zähler für Zeit seit letztem Abgleich wird bei Beginn der Abgleichladung zurückgesetzt. Die Tageszählergenauigkeit ist +1 / -0 Tage, da die Zählung aller 24 h ab Einschaltzeitpunkt der Batterie erfolgt. Das Einschalten der Batteriespannung spät abends in Betracht ziehen, um die Zählergenauigkeit zu verbessern.
Blue Sky Energy – IPN-ProRemote Menü „SETUP“ (Konfiguration) Vom Menü “Advanced Display” (fortgeschrittene Anzeigen) Gesamte Batterieladekapazität bei 25°C, 20-Stunden-Geschwindigkeit. SET BAT AMP-HRS 220AH SEL► SET CHG EFICENCY 94% SEL► Wenn der Ladewirkungsgrad auf 94% eingestellt wird, dann speichert die Batterie 94 Ah pro eingespeiste 100 Ah. Wenn der Ladewirkungsgrad-Modus auf “FIXED” (fest eingestellt) gesetzt wird, dann bleibt der Ladewirkungsgrad wie eingestellt.
Installation and Operation Manual Menü “BATTERY CHARGE PARAMETERS” (Batterieladeparameter) Vom Menü “Setup” (Konfiguration) Stellt den Grundladungs-Spannungssollwert ein. Bereich 10,0-80,0 V. SET ACCEPT CHG 14.4V SEL► Stellt den Pufferladungs-Spannungssollwert ein. Bereich 10,0-80,0 V. SET FLOAT CHG 13.4V SEL► Stellt Abgleichladungs-Spannungssollwert ein. Bereich 10,0-80,0 V. SET EQUALIZ CHG 15.2V SEL► Stellt Abgleichsladungs-Zeit ein. Bereich 0,5-10 h. SET EQUALIZ TIME 2.
Blue Sky Energy – IPN-ProRemote VERWENDUNG DER MENÜS UND TASTEN Die Navigation durch die Menüs und Funktionen sowie die Änderung von Einstellungen erfolgt einheitlich für alle Funktionen und Bildschirme. Das folgende Beispiel dient zur Illustrierung der typischen Bedienung. Beispiel – Einstellung von “Battery Amp-Hours” (Batterieladekapazitä) (auf 440 Ah in diesem Beispiel) BATTERY VOLT/AMP 12.6V +25.
Installation and Operation Manual Konfiguration des IPN-ProRemote ¾ Der IPN-ProRemote verfügt über verschiedene Konfigurationsparameter, die alle werkseitig voreingestellt werden. Die meisten Installationen erfordern keine Konfigurationsänderungen, außer einer Anhebung der „Acceptance Charge Time” (Grundladezeit) auf 4 Stunden und der Eingabe der tatsächlichen Werte für „Amp-Hours“ (Batterieladekapazität) und „Self Discharge Rate“ (Selbstentladegeschwindigkeit).
Blue Sky Energy – IPN-ProRemote Pufferladungsübergangs-Stromstärke “Time in Acceptance” (Zeit in Grundladung) ist eine akzeptierte Methode, um zu bestimmen, ob eine Batterie vollständig aufgeladen ist, wenn die NennBatterieladestromstärke nicht bekannt ist. Eine bevorzugte Methode, die der IPN-ProRemote anwendet, ist die Verwendung einer Nenn-Batterieladestromstärke, die an die Batterieladekapazität angepasst ist.
Installation and Operation Manual Stromableitungs-Signalverkabelung Die Stromableitung selbst ist ein unpolarisiertes Gerät. Sobald diese in Reihe mit dem Batterie-Minuspol installiert ist, dann erzeugt sie die in Abbildung 6 dargestellte Signalpolarität, während die Batterie geladen wird.
Blue Sky Energy – IPN-ProRemote ¾ Wenn die Hintergrundbeleuchtung eingeschaltet ist, dann kann der IPN-ProRemote bis zu 100 mA vom Laderegler ziehen. Zum ordnungsgemäßen Betrieb der Stromableitungs-Messschaltkreise muss die Gesamtspannungsdifferenz zwischen der IPNProRemote-Masse und der Stromableitung unter ±1,0 V gehalten werden, wenn die Hintergrundbeleuchtung eingeschaltet ist und der maximale Lade- oder Entladestrom in das System fließt.
Installation and Operation Manual “Days since last equalize or full charge” (Zeit seit letzter Abgleich- bzw. vollständiger Ladung) zeigt 1 Tag zuviel an “Days since last equalize” (Zeit seit letztem Abgleich) zurückgesetzt, ohne dass die Abgleichung beendet wurde Batteriestrom verpolt Batteriestromstärke scheinbar ungenau Der Tageszähler inkrementiert einmal pro 24 Stunden, nachdem die Spannungsversorgung eingeschaltet wurde. Der Tageszähler wird aktualisiert, wenn der Abgleich beginnt Normaler Betrieb.
Blue Sky Energy – IPN-ProRemote TECHNISCHE ANGABEN TECHNISCHE ANGABEN Stromableitung Batterie-Stromstärkemesser Batteriegröße Leistungsverbrauch Verbleibende Batterieladekapazität IPN-ProRemote 50 mV / 500 A Bereich ±773,3 A (bei Maximalwert) • Genauigkeit ±0,5% (bei Maximalwert) 20–10000 Ah 0,25 W typisch • 1,0 W typisch mit Hintergrundbeleuchtung eingeschaltet Basierend auf Messung der Batterieladekapazität; entsprechende Faktoren temperaturkompensiert Batterieladekapazität bis zur vollständigen Ladun