User's Instructions

CellTrackIT user manual Version 0.8 Page 21
The POWER LED should be on. Check the power cord is properly connected.
Check the power source by simply plugging in any AC device (plug in light or
power drill) and checking operation.
If the power source is working, try a new power cord or replace the
CellTrackIT transceiver.
The DATA LED should be flickering in an on-off mode. Check that the
antenna cable is properly connected. Then check the antenna. The antenna
check will require attaching the HandTrackIT to determine if transponder
transmissions are being received.
If transponder transmissions are received, replace the CellTrackIT
transceiver.