Installation Guide

3
Use #0104PACK Oval frame bolt package.
Use #0105(#0106)PACK Strap bolt package.
3) ASSEMBLINGSIDE VERTICAL, HORIZONTAL SUPPORT AND BRACE
P.No.0923
M8 x 20 Hex Head Bolt
P.No.3313 Side Vertical For 48" P.No.3314 Side Vertical For 52"
The Figure which looked at attachment of Side Upper Joint from down.
Resin Side Upper Joint
P.No.3177
(Packed #3 Package)
from inside, Do not fasten tightly. Connect brace to side vertical. put 1/4" nut from inside, Do not fasten Washer from outside then put M8 nut from insaide AND 1/4"X1/2" truss head screw from outside then Washer from outside then put M8 nut Connect side vertical to horizontal support. Put M8x20 hex head bolt with Plain Put M8x20 hex head bolt with Plain STEP2; STEP1; tightly.
STEP2
#12 Sheet Metal Screw P.No.0341
3/4
3' 1/4"
(920mm)
P.No.4105 Brace For 48"
(980mm)
3' 2-5/8"
P.No.4106 Brace For 52"
(1264mm)
P.No.3313 Side Vertical For 48"
4' 3/4"
P.No.3314 Side Vertical For 52"
4' 5-7/8"
(1367mm)
P.No.5238 Horizontal Support For 48"
(1270mm)
4' 2"
P.No.5239 Horizontal Support For 52"
(1321mm)
4' 4"