RESIN IN POOL LADDER MODEL NE1142 ASSEMBLY AND INSTALLATION INSTRUCTIONS
Parts Identification STEP 1 Unpack box and check parts against parts list below.
STEP 2 • Slide each of the aluminum handrails over the posts on the step assembly. See figure 1 • If you have any difficulty sliding the step onto the post apply a small amount of oil to the posts. • Align the holes in the hand rails with the holes on the posts • Secure step to handrail with a bolt and nut. Make sure that the head of the bolt is on the inside of the step.
STEP 3 • • Slide 1 pivot ball onto the bottom of each base post as shown in figure 3 Make sure both pivot balls are securely fastened to each handrail. Figure 3 STEP 4 • • • Place the bottom step on the floor facing up Hold the ladder assembly straight up and align the pivot balls with the receivers on the bottom step. Push down firmly until both balls inserted into the step. See figure 4 Figure 4 Ladder Placement - Figure 5 • Locate ladder in desired position on deck.