Instructions / Assembly

• The valve ports are labeled “RETURN”, “PUMP” and “WASTE” with raised

letters next to the openings.

• Cover the threads of each straight fitting (J) with Teflon tape (K) and thread

one fitting into each of the 1-1/2” threaded openings on the valve.

• Attach one 6’ hose (M) to the bottom of the thru-wall skimmer and to the front

of the pump with (2) hose clamps

(H).

• Clamp one end of 3’ hose (L) to the top of the pump and the other end to the

threaded fitting on the

“PUMP” port of the valve.

• Attach second 6’ hose (M) to the fitting on the “RETURN” port and secure the

opposite end to the fitting on the pool’s return with clamp.

• “WASTE” port will accept a standard fitting and a backwash hose

(sold separately) which will be used during maintenance.

• Check drain plug (N) at bottom of filter to ensure that it is screwed on tight.

STEP 6