Use and Care Manual

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

1. To reduce the risk of injury, do not allow children to use this equipment

2. Connect only to a grounding type receptacle that is protected by a ground

fault circuit interrupter (GFCI).

3. Do not bury the cord. Locate cord so it would come in contact with lawn

mowers, trimmers or other equipment.

4. Do not connect this equipment to an extension cord. To reduce the risk of

electric shock, only connect the electric cord to a properly located outlet.

5. To reduce the risk of shock, replace damaged cords immediately.

Do not use this equipment if cord appears damaged.

6. To reduce the risk of shock, connect ground wires to the grounding screw

located in the motor.

7. To reduce the risk of shock, a bonding connector is provided for bonding

to any metal within 5 feet of the swimming pool. All local points should be

bonded with #8AWG (8.4mm2) wire.

WARNING

NOTE

To installer and/or operator of the Maxi- Force swimming pool pump: the

manufacturer’s warranty will be void if the pump is improperly installed

and/or operated.

NOTE

All wiring should be done by a qualified electrician in accordance

to the National Electric Code and all Local Codes and ordinances.

When installing and using this electrical equipment, basic safety

precautions should ALWAYS be followed.