Instructions / Assembly

Stand-Up Paddle Board Paddle

3-Piece Adjustable Fiberglass

ADJUST

The 3-Piece Adjustable Stand-Up Paddle Board Paddle is

designed to provide accessible fun for paddlers at any skill

level. By opening the latch on section B, the length of the

paddle can easily be adjusted from 67-in to 83-in to

accommodate all users.

1-YEAR WARRANTY

Your SUP paddle comes with a 1-year limited warranty. We

promise that it will arrive damage free with all necessary

parts and accessories. Otherwise, we’ll send replacement

parts or an entirely new unit to you at no cost.

ASSEMBLE

Locate section A and section B of the paddle. Check that

the latch at the top of section B is in the open position.

Insert the bottom of section A into the latch fitting of

section B. Determine your desired paddle length and align

the corresponding measurement on section A with the

arrow on the top of the latch. Close the latch, securing

section A into place.

Next, attach section C to the bottom of section B using the

spring-button. While holding down the spring-button

located near the bottom of section B, slide the pole into

the top of section C, aligning the spring-button with the

hole near the top of section C. The button will pop into

place, securing section C to section B.

Now, all three sections are secured into place and ready

for the water!

RL30123

DISASSEMBLE

Designed for easy transport and storage, this three-piece

paddle can quickly be broken down into 3 pieces and

packed into your luggage or inflatable SUP bag.

To disassemble, push in the spring-button section B while

pulling sections B and C apart. Next, open the latch on

section B and pull sections A and B apart.