Owner's manual

Flowmeter
14 inches
355.6 mm
3 inches
76.2 mm
Diameter
SPECIFICATIONS
Meter Body: Acrylic, clear
Floats: #316 Stainless Steel (optional Hastelloy)
Float Stops: Polysulfone
Guidewire: #316 Stainless Steel (optional Hastelloy)
Adapters: PVC
O-Rings: Viton and Aflas
Scale: Permanent Dual Scale Silkscreen
Max. Pressure: See Temperature vs. Pressure chart*
Max. Temperature: See Temperature vs. Pressure chart*
80000-380 09/18/2012
F-430
®
Your Blue-White F-430 Series In-Line Flowmeter
®
Your Blue-White flowmeter was designed to be easy to install.
Please read the Instruction Guideline on the next page before installing your flowmeter.
This flowmeter is an instrument, and special care should be taken when installing.
Unpacking the Flowmeter
!
Check for damage while unpacking the flowmeter.
!
Remove the plastic tube that has been inserted during packaging for shipping reasons.
!
Be sure the meter is suitable for your application.
!
The maximum temperature and pressure is shown on the following page.
®
!
Although the meter may be suitable for other chemicals, Blue-White meters are tested with
water and air only. If you are unsure of the meters compatibility with your chemical, consult the
factory.
®
!
Blue-White guarantees the meter is suitable with air and water only.
Industries, Ltd.
Blue-White
Industries, Ltd.
®
5300 Business Drive | Huntington Beach | CA | 92649 | USA