Manual

ManualsBrandsBlue-White ManualsSensorsF-440 Polysulfone Molded

Your Blue-White F-440 Series

Your Blue-White flowmeter was designed to be

easy to install.

Please read the Instruction Guideline on the next

page before installing your flowmeter.

This flowmeter is an instrument, special care

should be taken when handling and installing.

Inspection of the Flowmeter and Compatibility

Carefully inspect the meter for any damage that may have occurred during shipping.

Remove the plastic tubing that has been inserted during packaging for shipping

reasons.

Make sure your pressure, temperature, fluid and other requirements are compatible

with the meter before installation.

The maximum temperature capability decreases as the pressure increases. The max

PSI decreases as the temperature increases. See the chart on the following page.

Although the meter may be suitable for other chemicals, Blue-White meters are tested

with water. If you are unsure of the meters compatibility with your chemical, please

consult the factory.

Blue-White warranties the flowmeter for use with air and water only.

Installation Instructions

80000-440 09/18/2012

F-440N

Blue-White

Industries, Ltd.

Model No.

F-44250E

F-44330E

F-44375E

F-44376E

F-44500E

F-44560E

F-44750E

Dim A Dim B Dim C Dim D

7”

178mm

7”

178mm

8-1/8”

206mm

3 ½”

76mm

3 ½”

76mm

3 3/8”

76mm

1-11/16”

43mm

2”

51mm

2”

51mm

6”

152mm

6-13/16”

173mm

6-13/16”

173mm

Meter Body: Polysulfone

Float: 316SS, Hastelloy C-276, PVDF, or PTFE

(based on model)

Guide rod: # 316 Stainless (opt. Hastelloy C-276)

Adapters: Polysulfone

O-Rings: Viton (optional EP)

Scale: Permanent, dual scale silkscreen (black ink)

Max. PSIg: 175 PSIG / 12 BAR at 70°F/21°C

Max. Temp: 212°F / 100°C at 0 pressure

Accuracy: ± 4% of full scale reading

F-440N

F-440NE

F-440NEA

F-44250EA

F-44330EA

F-44375EA

F-44376EA

F-44500EA

F-44560EA

F-44750EA

7”

178mm

8 1/8”

203mm

5”

127mm

5”

127mm

1-11/16”

43mm

2”

51mm

5-15/16”

151mm

6-13/16”

173mm

F-44250

F-44330

F-44375

F-44376

F-44500

F-44560

F-44750

6-3/16”

157mm

7-1/2”

191mm

1-11/16”

43mm

2”

51mm

N/A N/A

InlineElbowAdjustable

Summary of content (8 pages)

PAGE 1
Installation Instructions F-440N F-440NE B Model No.
PAGE 2
Installation Guideline Ceiling Caution: Follow these instructions to avoid failure. Danger: Wear eye protection when installing or removing flowmeter. 1. Misalignment will damage the meter! Flowmeter must be installed in an exact vertical plane to ensure accuracy. Be certain of proper plumbing alignments. Misalignment may cause the o-ring seals to leak. The meterbody material can be damaged by UV rays. Do not install in direct sunlight. 3 1 2 3 2.
PAGE 3
Temperature vs. Pressure Temperature 212°F/100°C 190°F/87.7°C 170°F/76.6°C 150°F/65.6°C 130°F/54.4°C 110°F/43.3°C 90°F/32.2°C 175 psi 12 bar 150 psi 10.3 bar 120 psi 8.3 bar 90 psi 6.2 bar 60 psi 4.1bar 0 psi 0 bar 30 psi 2.1 bar 70°F/21.1°C Pressure and Temperature Pressure and temperature limits are inversely proportional. At the maximum suggested pressure the temperature should approach 70°F / 21.1°C; at the maximum suggested temperature the pressure should approach zero psi.
PAGE 4
F-440 - In-Line 2 1 4 7 5 6 11 5 4 1 2 No. Part No. F-44N07 F-44N08 F-44N24 F-44N22 1 F-44N09 F-44N25 F-44N23 F-45N011 F-45N013 F-44N05 F-44N05AL 2 F-44N06 F-44N06AL 90003-152 4 90003-153 90003-082 90003-039 5 N/A F-44N14 F-44N15 6 F-44N14H F-44N15H 7 F-45N007 7 F-45N019 11 F-45N043 Desc.
PAGE 5
F-440E - Elbow (Panel Mount) No. Part No. F-44N40 1 F-44N20 F-44N21 F-44N05 2 F-44N06 F-4427A 3 F-4428A 90003-152 90003-153 4 90003-082 90003-039 5 N/A F-44N14 F-44N15 6 F-44N14H F-44N15H F-45N007 7 F-45N019 11 F-45N043 3 2 1 4 7 5 11 6 5 7 2 4 1 3 Desc.
PAGE 6
F-440A - Adjustable (Panel Mount) 3 2 1 4 7 5 6 5 7 4 8 10 9 11
PAGE 7
F-440A - Adjustable (Panel Mount) No. Part No. F-44N40 1 F-44N20 F-44N21 F-44N05 2 F-44N06 F-4427A 3 F-4428A 90003-152 90003-153 4 90003-082 90003-039 5 N/A F-44N14 F-44N15 6 F-44N14H F-44N15H F-45N019 7 F-45N007 F-44N40-1 F-44N40-2 8 F-45N031-1 F-45N031-2 F-45N031-3 90003-010 9 90003-009 90003-018 10 90003-071 11 F-45N043 Desc.
PAGE 8
BLUE-WHITE INDUSTRIES LIMITED WARRANTY FLOWMETERS are warranted to be free of defects in material and workmanship for up to 12 months from the date of factory shipment. Warranty coverage is limited to repair or replacement of the defective flowmeter only. Blue-White Industries does not assume responsibility for any other damage that may occur.