Owner's Manual

2
GETTING STARTED WITH YETI
After unpacking your Yeti, rotate the microphone 180
degrees so that the Blue logo and headphone volume )
control are facing you. Tighten the set-screws on the • I
left and right of the base after adjusting the microphone
to your desired angle. Connect Yeti to your computer
with the supplied USB cable-the LED just above the Blue
logo will glow red, indicating power has reached the mic.
Yeti is a side-address microphone, which means
you should speak, sing, and play into the side of the
microphone with the Blue logo facing the sound source,
not the top of the microphone. Now you can start
recording and streaming in stunning audio quality.