User's Manual

2 3
GETTING STARTED WITH YETI SOFTWARE SETUP
USING YETI WITH PC
(WINDOWS 7, 8.1, OR 10)
1. Connect to your PC using the provided USB cable.
2. From the Start menu, select the Control Panel.
3. From the Control Panel, select the Sound icon.
4. Click the Recording tab and select Yeti.
5. Click the Playback tab and select Yeti.
USING YETI WITH MAC
(macOS 10.10 OR HIGHER)
1. Connect to your Mac using the provided USB cable.
2. Open System Preferences and select the Sound icon.
3. Click the Input tab and select Blue Yeti.
4. Click Output tab and select Yeti.
5. From this screen, set the Output volume to 100%.
After unpacking your Yeti, rotate the microphone 180
degrees so that the Blue logo and headphone volume
control are facing you. Tighten the set-screws on the
left and right of the base after adjusting the microphone
to your desired angle. Connect Yeti to your computer
with the supplied USB cable—the LED just above the Blue
logo will glow red, indicating power has reached the mic.
Yeti is a side-address microphone, which means
you should speak, sing, and play into the side of the
microphone with the Blue logo facing the sound source,
not the top of the microphone. Now you can start
recording and streaming in stunning audio quality.
Whatever your favorite software is—Audacity, Garageband, iMovie, Ableton, Skype, you name it—Yeti will produce
amazing results. Simply plug the mic into your Mac or PC, select Yeti as your recording input within your selected
software, and start recording—no drivers required. It’s that easy.
For game streamers, Yeti is compatible with most popular live-streaming software programs including Discord,
Open Broadcaster Software (OBS), XSplit, Gameshow and more.