User`s guide

About the Control Panel
11
4 Display key Press to check the status of this machine and the
specified settings.
 Displays a rough estimate of the amount of toner
remaining.
 Displays the total number of pages that have
been copied, printed and scanned.
 Displays the results for fax transmissions and
receptions.
 Prints the machine settings, lists and reports
related to faxing.
For details, refer to “Checking the Machine Status
and Settings” on page 17.
5 Quality key Press to specify the document type to be copied and
the resolution.
6 Message Win-
dow
 Displays information such as the media type,
copy density, and zoom ratio. For details, refer to
“Display Indications” on page 14.
 Displays an error message when an error occurs.
For details on error messages, refer to “Status,
Error, and Service Messages” on page 198.
7 Keypad Type in values such as the desired number of cop-
ies.
8 Fax key Press to enter Fax mode. The key lights up in green
while the machine is in Fax mode. For details, refer
to the Color Laser MFP Fax_PC Fax User's Guide.
9 Scan key Press to enter Scan mode. (only with a network) The
key lights up in green while the machine is in Scan
mode. For details, on the Scanner functions, refer to
“Using the Scanner” on page 117
10 Copy key Press to enter Copy mode. The key lights up in
green while the machine is in Copy mode. For
details on the Copy functions, refer to “Using the
Copier” on page 103.
11 2in1 key Press to specify 2in1 copying.
12 Collate key Press to specify collated copying.
No. Name Function