User's Manual

English Blueair Classic 500/600 Series 6
English Blueair Classic 500/600 Series 7
Step 2
Open the hidden display and press the
airflow speed touch button. A blue LED
on the front indicates that the unit is
working.
Step 1
Plug the fixed power cable into a
grounded wall outlet.
Starting up the air purier unit
FILTER
Wi-Fi
Classic 680i - via remote control
Refer to pg. 9 “Controlling air purifier settings with Blueair App”
Adjusting speed
Classic 505/605 - manually
For maximum speed press the airflow
speed touch button so that 3 blue bars
are shown. After a few minutes adjust
to required speed by pressing the
touch button again to start the speed
adjustment cycle again.
Maximum speed is recommended for fast initial cleaning, daytime use or very
polluted air.
Minimum speed is recommended for nighttime use.
Min
Speed 1 Speed 2
Max
Speed 3
Control panel and touch buttons
The control panel and touch buttons are located under the hidden display.
Classic 505/605
Classic 680i
AUTO VOC PM 2.5
Wi-Fi
FILTER
Wi-Fi indicator
Auto speed
VOC indicator
PM 2.5 indicator
Air ow speed control
Filter replacement indicator
Wi-Fi FILTER
Filter
Status - Blue -
No replacement
filter currently
needed.
Filter
Status - Orange.
Replace filter and re-
set by pressing down
for 5 seconds
Auto speed
Status:
Blue - active
Grey - inactive.
Always blue when
unit is on
PM2.5 indicator
Status:
Orange - high levels.
Blue - low levels.
Wi-Fi indicator
Status - “blinking”
no connection
Wi-Fi indicator
Status - OFF
Air ow speed
control
Status - OFF
Speed control
Status - 1 blue bar
(minimum speed)
Speed control
Status - 2 blue bars
(medium speed)
VOC indicator
Status:
Orange - high levels.
Blue - low levels.
Wi-Fi indicator
Status - grey and
blue - Wi-Fi con-
nected
Speed control
Status - 3 blue bars
(maximum speed)