User's Manual

12
> Pair Me — Puts the S4 into pairing mode. Any connected phone will be disconnected.
> Phone Commands — Activates your phone’s voice dialing feature (if available). Depending on your phone
model, you may need to record voice tags on the phone to use this feature.
> Redial — Redials the last outgoing call made on the connected phone. This is the last outgoing call made on
the phone, regardless of whether the phone was connected to the S4 at the time.
> Sensitivity Level — Configures the sensitivity of the S4’s voice recognition.
> LED Light — Turns the LEDs on or off. When the LEDs are set to off, they still light up when you turn the S4
on or off, but will not flash at other times.
> Update Phonebook — Updates your phonebook contacts on the S4. If you add contacts to your phone, or
change the numbers associated with existing contacts, then you will need to use this command to copy the
updated contacts to the S4.
> What Can I Say? — Reads out a list of all the commands available on the current menu.