User's Manual

ENGLISH
5
Pair the S4 with your Phone
To use the S4 you need to pair it with your phone. Once paired, they will reconnect automatically in future.
1. Slide the power switch on the side of the S4 to the ON position.
2. If this is the first time you have used the S4 it will go straight to pairing mode. You can tell that the S4 is in
pairing mode because the S4’s indicator lights will alternately flash blue and red, and the voice prompts will
talk you through the pairing process.
If this does not happen, say BlueAnt Speak To Me, wait for the S4 to ask you to Say A Command and then
say Pair Me.
3. Follow the voice prompts to pair the S4 with your phone. The pairing code is 0000 (four zeros).
4. Once the pairing is complete, your S4 will attempt to copy the contacts from your phone’s address book so
that it can announce the name of the caller when you receive a call. Please wait for the phonebook upload to
finish.
Some phones do not support automatic phonebook transfers. If this is the case on your phone, the S4 will