Bluetooth User Guide

d. ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit as well as on

the phone.

1. Press the Pick-Up/Hang-Up Button once to answer the call.

2. End the call by pressing the Pick-Up/Hang-Up Button.

Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the

Handsfree Kit.

e. MAKING A CALL with the Handsfree Kit on

Normal dialing

1. Enter the contact number and send. As you dial, audio and the keypad tones can

be heard on the Handsfree Kit simultaneously but not on the phone.

2. Press the Pick-Up/Hang-Up Button to terminate the call.

Note: If the call is terminated using the cellular phone, a tone will be heard on the

Handsfree Kit indicating that the call has been terminated.

Voice dialing

Refer to step j for the procedure when recording for voice dialing.

1. Press the Pick-Up/Hang-Up Button once to activate the voice dialing.

2. A beep will then be heard on the Handsfree Kit prompting the user to say the name

of the person to call.

3. Say the name. The name will be played back to you. The phone will then place the

call automatically. In case the cellular phone does not recognize the name spoken,

the steps above may be repeated.

4. Press the button again to terminate the call.

Redialing

Make a long press on the Pick-Up/Hang-Up Button to redial the last number.

f. AUDIO TRANSFER

Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls.

Kit to Phone

Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer

the audio from the kit to the phone.

Phone to Kit

Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then

press shortly the Pick-Up/Hang-Up Button. The audio will be transferred

from the phone to the kit.

g. REJECTING A CALL

Press the Reject Button to reject the incoming call

h. RECONNECTING SUPERTOOTH

(only for some Nokia phones, others auto-connect)

After coming into range or turning SuperTooth back on, Press the Pick-Up/Hang-Up key on

the SuperTooth once to Reconnect.