Bluetooth User Guide

FREQUENTLY ASKED QUESTIONS

(FAQ)

1. Am I using the correct pairing Mode according to my phone?

2. Why won’t my Supertooth II won’t go into Pairing mode?

3. Is my Supertooth II Charged?

4. Why will my Supertooth II not connect when turned on or comes into

range (10m)?

5. Why can’t I hear any sound from the Speaker?

6. Why is the Supertooth II noisy and distorted?

7. Is it safe to use Bluetooth devices, I have heard they can allow

unauthorized connections?

1. Am I using the correct pairing Mode according to my phone?

• It is of most importance to establish whether your mobile phone uses

Handsfree or Headset Modes for Pairing, and to use the appropriate

mode when pairing the Supertooth II. If both are available, use

Handsfree. (To find out refer to the table in this User Manual, or in the

Bluetooth section of your phones manual.)

2. Why won’t my Supertooth II won’t go into Pairing mode?

• Follow through the Pairing Guide according to your phone in the

Supertooth II Manual or below.

• Be clear about the extra step required to enter Headset Mode

• The Supertooth II sometimes requires a few seconds to establish a

connection. Advise user to be patient while devices are searching.

3. Is my Supertooth II Charged?

• Blue Flashing Light = Battery Charged

• Red Flashing Light = Battery Low needs recharging