OVERVIEW The SuperTooth II is equipped with Bluetooth Technology and a Digital Signal Processor which allow wireless communications on devices such as Mobile phones, Smartphones and PDA’s. It is designed to be a totally portable wireless handsfree kit which will enable the user to communicate freely without holding a phone. The Supertooth II will work with any Bluetooth cellular phones available provided that they respect the Bluetooth Protocol. Don't forget: Drive safely and within the law.
CONTENTS OVERVIEW..................................................................................................... 2 CONTENTS .................................................................................................... 3 GETTING STARTED ..................................................................................... 4 VEHICLE PLACEMENT ............................................................................................. 4 CHARGING THE SUPERTOOTH II...................................
GETTING STARTED VEHICLE PLACEMENT The optimum place to position the Supertooth II in the vehicle is on the sun visor. The Supertooth II sun visor clip is designed to be reversible to easily transfer the Handsfree Kit in case you change the position of the sun visor. Fix the metal clip of SuperTooth II to the sun visor. Sun Visor Fixing the Clip Attach the magnetic back of SuperTooth II to the fixed metal clip. The Supertooth II must be placed wherein its microphone is directed to the mouth of the user.
CHARGING THE SUPERTOOTH II SuperTooth II can be charged in a car using the SuperTooth II Car Charger or at home using the Wall charger. 1. Connect the charger’s plug into the Charger Input of SUPERTOOTH II. Charge Indicator Status: • Red = Low battery • Steady Green = Fully charged • Alternate Red/Green = indicates charging 2. When fully charged, disconnect the charger. Bluetooth Indicator Status: • Blinking Blue = standby (when Swivel Arm is open to 55º to 210º positions).
BLUETOOTH PAIRING PROFILES IMPORTANT NOTICE!!! You must establish the correct Bluetooth Pairing Mode for your mobile phone before connecting. If your handset is not listed on the next page, look in your phones manual to find the right Bluetooth Profile to use. Alternatively, call the Blueant Customer Support Team or visit www.blueant.com.au for more information. Note: Most newly released phones use the Bluetooth Handsfree Profile.
SUPERTOOTH II COMPATIBILITY Required Profile Phone models Headset BlackBerry 7100v / 7100g / 7290 / 7250 I-Mate PDA2K / PDA2K EV-DO / SP3 / SP3i I-Mate Jam / Pocket Pc / Smartphone 2 / HP IPAQ 6315 / 6365 / 6385 MOTOROLA A1000 / E1000 / A925 / A835 / E398 / MPX220 / MPX / V3 / V80 / V600 / V620 / V525 / V535 Nokia 810 / 3230 / 3650 / 3660 / 6230 / 6255 / 6260 / 6260 / 6310 / 6310i / 6600 / 6630 / 6650 / 6670 / 6820 / 7280 / 7600 / 7610 / 8910 / 8910i / 9300 / 9500 / N'GAGE Nokia AD-5B Wireless Bluetooth Ada
EXAMPLE PROCEDURE FOR PAIRING TO A MOBILE PHONE • Pairing to your phone is not possible while charging the Supertooth. • First, refer to the Compatibility Table above for suggested pairing modes to determine what pairing mode is best for your phone. • Pairing will create a link or connection between the two Bluetooth devices, SuperTooth II and your phone. This kit supports either Handsfree or Headset pairing. The Handsfree and Headset pairing procedures are different.
HANDSFREE pairing: (Example) 1. Bring the mobile phone to about 20cm from SuperTooth II. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue.
HEADSET Pairing: (Example) 1. Bring the mobile phone to about 20cm from the Supertooth II. 2. SuperTooth II is initially off. Turn it on by flipping up the Swivel Arm to 55º position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and PickUp/Hang-Up Button for about 10seconds. A distinctive tone will be heard and The Bluetooth indicator LED will change from blinking blue to alternate blinking red and blue. 4. Press the Pick-Up/Hang-Up Button again.
Note: If pairing has failed, repeat the procedure. If pairing succeeded, then your SuperTooth II kit is now ready to use. You can now make or answer a call using your kit instead of your phone. Important Remarks: • • On some versions of Nokia, Motorola, Sony Ericsson and Sharp phone software, the kit will not connect automatically to the cell phone until you do One press on the PickUp/Hang-Up Button of the Supertooth II to connect to the cell phone.
MAKING/RECEIVING CALLS ANSWERING A CALL When the phone receives a call, a ring tone is heard on SuperTooth II and at the same time on the telephone (depending on your phone model). 1. Shortly press the Pick-Up/Hang-Up Button to answer the call. 2. When communication is over, press the Pick-Up/Hang-Up Button to terminate the call. MAKING A CALL USING THE SUPERTOOTH II Normal dialing 1. Enter the contact number and press send on the phone. Normally, audio will be on the kit.
Redialing (Handsfree profile only) Make a long press on the Pick-Up/Hang-Up Button. Audio will be on the Supertooth II. Audio Transfer Kit to Phone Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit For Nokia Phones: Flip up the Swivel Arm from 0º to 55º or 210º positions. This will automatically transfer the audio from phone to kit.
VOLUME LEVELS – Finding The Right Balance 1) The Supertooth II has a very powerful speaker that is designed to boost low level voice signals if required. Use the Volume Control Knob to turn down levels if too much signal is present and distortion or echo occurs. The Supertooth II sounds best when it is loud enough to cut through to be heard without becoming too loud and distorting.
MANUALS FOR INDIVIDUAL MOBILE your phone does not appear below, please use a manual for a similar PHONES Ifphone or use the Example Pairing procedure above. Also check the website for newly updated models and also for older outdated models. www.blueant.com.au BLACKBERRY 7100v / 7100g / 7290 / 7250 ............................................... 16 IMATE POCKET PC / JAM .......................................................................... 18 IMATE PDA2k / PDA2K EV-DO ...................................
BLACKBERRY 7100v / 7100g / 7290 / 7250 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You may need to register your device to download updates. For Blackberry go to www.blackberry.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your device to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1.
2. 3. e. When answering is done on the phone, ongoing call will be heard on the phone (not on the Supertooth). But if you wish to hear and transfer the audio to the Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth. To terminate the call, press down the Pick-Up/Hang-Up Button. MAKING A CALL with the Supertooth on Normal dialing With your Device you can make a call using different methods. Please refer to your PC Phone’s User Guide.
IMATE POCKET PC / JAM Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Imate go to www.clubimate.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your Imate to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Tap . Scroll down to Settings. Tap Connections.
d. MAKING A CALL with the Handsfree Kit on Normal dialing With your Imate you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 1. Press button to bring up the dialer screen. 2. Tap the number on the keypad, and then tap Talk key. Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediately on the Handsfree Kit.
IMATE PDA2k / PDA2K EV-DO Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Imate go to www.clubimate.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your device to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1.
d. e. MAKING A CALL with the Supertooth on Normal dialing With your Device you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 1. Press button to bring up the dialer screen. 2. Tap the number on the keypad, and then tap Talk key on your phone. Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth.
IMATE SP3/SP3i Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Imate go to www.clubimate.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Select Start . Select Settings. Select Bluetooth.
d. MAKING A CALL Normal dialing With your Phone you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 1. Tap the number on the phone’s keypad, and then press the Talk key on the phone. Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth.
I-MATE SMARTPHONE 2 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Smartphone 2 go to www.clubimate.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your Smartphone2 to establish a Bluetooth connection between your device and other Bluetooth devices. 1. Tap . Scroll down and Tap Settings. Tap Bluetooth. 2.
d. MAKING A CALL with the Handsfree Kit on Normal dialing With your Smartphone2 you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 1. Press button to bring up the dialer screen. 2. Tap the number into the keypad, and then tap Talk key. Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediately on the Handsfree Kit.
HP IPAQ 6315 / 6365 / 6385 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You may need to register your device to download updates. For Hp 6365 go to www.hp.com.au a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your device to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1.
d. MAKING A CALL with the Supertooth on Normal dialing With your Device you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 3. Press button to bring up the dialer screen. 4. Tap the number on the keypad, and then tap Talk key on the phone. Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth.
MOTOROLA A1000 / A925 / A835 a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Tap Menu icon at top right of screen. Tap Control Panel, Tap Connections, Tap Bluetooth. Tap Settings. For Operation Mode select Bluetooth On. 2. Tap Done. b. PAIRING TO THE CELLULAR PHONE (not possible during charging) 1. Bring the cellular phone at about 20 cm from the Supertooth. 2.
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit.” f. REJECTING A CALL Tap Busy on your phone. g. SETTING THE VOLUME Setting the volume can be done using the Volume Control. 1. Turn it clockwise to increase the volume. 2.
MOTOROLA V3 / V80 / V525 / V535 / V600 / V620 / E398 a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. or press on the center button of the 5-Way 1. Press Menu key featured as 2. 3. b. NavigationKey featured as to access Menu. Scroll to Settings, SELECT. Choose Connection, SELECT. Bluetooth Link, SELECT. Scroll to Setup, Select. Scrool to Power, Select.
Voice dialing Refer to step h and i for the procedure when activating and recording for voice dialing. 1. Press the Pick-Up/Hang-Up Button once to activate the voice dialing. 2. A beep will then be heard on the Handsfree Kit prompting the user to say the name of the person to call. 3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. 4.
5-Way Navigation Key featured as to access Menu. Scroll to Phonebook, SELECT. . Choose Edit, 2. Choose a contact that you want to make a voice dial to, then press then press SELECT. 3. On the Entry Details, choose “…MORE…” and press SELECT. 4. On the Add New, choose Phone Number, SELECT. This is highlighted, “No.:_______”. Press CHANGE. Enter the corresponding contact number and then press Ok. (Do not press DONE yet). 5. Press RECORD button on side of phone. Follow instructions on the screen.
NOKIA 6255/6230/6820/6650/6310/6310i a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press Menu and select Settings, Connectivity and Bluetooth. (For 6310 Press Menu and select Bluetooth) 2. Select Blue tooth on and On. 3. b. PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit) 1. Bring the cellular phone at about 20 cm from the Handsfree Kit. 2.
d. ANSWERING/RECEIVING A CALL When the phone is receiving a call, same ring tone will be heard simultaneously on the Handsfree Kit as well as on the phone. 1. Press once on the Pick-Up/Hang-Up Button to answer the call. 2. End the call by pressing the Pick-Up/Hang-Up Button. Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the Handsfree Kit. e. MAKING A CALL with the Handsfree Kit on Normal dialing 1.
i. RECORDING FOR VOICE DIALING Use your phone when recording voice dialing. 1. Press Menu and select Contacts and Search. 2. Choose the name which you want to make a voice dial then press Details. 3. Press Options and select Add voice tag. Follow the instructions that are displayed. Your voice will then be saved on the phone after it is played back to you. 4. Continue pressing Back then finally Exit. Note: Record your voice command in a quiet place so that only your voice will be recorded on the phone.
NOKIA 3230/6260/6600/6670/7610/3650 a. b. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press the Menu key. Using the joystick, scroll to Connect, press to select. A list of options will be displayed. Choose Bluetooth, press to select. 2. Bluetooth OFF will be displayed. Press to switch Bluetooth On. 3. Continue pressing Exit key to get out of Menu.
d. ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit as well as on the phone. 1. Press the Pick-Up/Hang-Up Button once to answer the call. 2. End the call by pressing the Pick-Up/Hang-Up Button. Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the Handsfree Kit. e. MAKING A CALL with the Handsfree Kit on Normal dialing 1. Enter the contact number and send.
i. SETTING THE VOLUME Setting the volume can be done during calls or every time a key is pressed on your cell phone. 1. Turn it clockwise to increase the volume. 2. Decrease the volume by turning it counter-clockwise. Note: If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls. It is also possible to use the volume keys of the cellular phone to set the volume. j. RECORDING FOR VOICE DIALING Use your phone when recording voice dialing. 1.
NOKIA 9500 / 9300 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You may need to register your device to download updates. For Nokia 9500 go to www.nokia.com.au a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1.
d. MAKING A CALL Normal dialing With your Phone you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 1. Tap the number on the phone’s keypad, and then press the Talk key on the phone. Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth.
NOKIA WIRELESS AUDIO ADAPTER AD-5B The Nokia Bluetooth adapter supports Bluetooth Headset Profile only, Therefore the Supertooth needs to be placed into Headset Pairing Mode first. a. PAIRING TO THE CELLULAR PHONE 1. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink). 2. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds.
Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the case you have to press once on the Send Button to transfer the audio to the Kit. 2. d. To terminate the call, press down the Pick-Up/Hang-Up Button. AUDIO TRANSFER DURING A CALL Kit to Phone Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone.
02 XDA11s Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Xda11s go to www.seeo2.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your device to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Tap the Bluetooth icon in the bottom right of your today screen. 2.
d. MAKING A CALL with the Supertooth on Normal dialing With your Device you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 1. Press button to bring up the dialer screen. 2. Tap the number on the keypad, and then tap Talk key on the phone. Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth.
O2 XPHONE2 Note: Please make sure you have the latest firmware upgrade for your phone. Go to the support section of the following website to check you have the latest version. You will need to register your device to download updates. For Xphone2 go to www.seeo2.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Select Start . Select Settings. Select Bluetooth.
d. MAKING A CALL Normal dialing With your Phone you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 1. Tap the number on the phone’s keypad, and then press the Talk key on the phone. Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth.
O2 XDA11 / XDA MINI Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For XDAII go to www.seeo2.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your XDAII to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Tap . Scroll down to Settings. Tap Connections.
d. e. MAKING A CALL with the Handsfree Kit on Normal dialing With your XDAII you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 1. Press button to bring up the dialer screen. 2. Tap the number on the keypad, and then tap Talk key. Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediately on the Handsfree Kit.
02 XPHONE Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Xphone go to www.seeo2.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your Xphone to establish a Bluetooth connection between your device and other Bluetooth devices. 1. Tap . Scroll down and Tap Settings. Tap Bluetooth. 2.
1. Press button to bring up the dialer screen. 2. Tap the number into the keypad, and then tap Talk key. Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the case you have to press once on the Send Button to transfer the audio to the Kit. 3. To terminate the call, press down the Pick-Up/Hang-Up Button. e. AUDIO TRANSFER DURING A CALL 1.
PALM TREO 650 Note: Please make sure you have the latest firmware upgrade for your phone. Go to the support section of the following website to check you have the latest version. You will need to register your device to download updates. For Treo 650 go to www.palmone.com/au a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Press the Home Button to bring up the main menu. 2.
The most direct method is by using the Phone keypad. 4. Tap the number on the phone’s keypad, and then press the DIAL key on the phone. Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth. If this is the case you have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit. 5.
PANASONIC P342i / X700 / X70 a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Go to Menu by pressing the center button of the 5-way navigation key featured as 2. (For X70 scroll to Organizer then) Scroll to Connect, Select. Bluetooth, Select. 3. On/Off, Select. Choose On, Select. b. . PAIRING TO THE CELLULAR PHONE (not possible while charging the Supertooth) 1.
2. 3. 4. the voice dialing. Beep will then be heard on the Supertooth prompting the user to say the name of the person to call. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. Press the Pick-Up/Hang-Up Button to terminate the call. Redialing Make a long press on the Pick-Up/Hang-Up Button to redial the last number. e.
6. 7. Follow the instructions on the screen. Voice is then saved on the phone. Under Voice Dial list, the name which already has a voice command appears. Continue pressing to exit. Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment.
SHARP GX30/GX32/GX15/GX25 a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press to display Main Menu. 2. Highlight Settings, and then press to select. 3. Select Connectivity, Bluetooth, Bluetooth On/Off and Select On. 4. Continue pressing Back then finally Exit. The Bluetooth setting is activated. Bluetooth icon is displayed on standby mode screen. b.
e. AUDIO TRANSFER Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls. Kit to Phone Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit. f.
SIEMENS S65 / S55 a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press Menu button. Scroll to Setup, SELECT. Choose Connectivity, SELECT. 2. Scroll to Bluetooth, CHANGE. The phone is now connecting to the Bluetooth device. An icon will appear on the upper left corner when connected. Note: OPTIONS button may also be pressed. Choose Activate BT, then SELECT. 3.
2. 3. 4. A beep will then be heard on the Handsfree Kit prompting the user to say the name of the person to call. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cellular phone does not recognize the name spoken, the steps above may be repeated. Press the Pick-Up/Hang-Up Button to terminate the call. Redialing Make a long press on the Pick-Up/Hang-Up Button. It will trigger the cell phone to redial the last number.
SIEMENS SX1 a. b. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your mobile phone to establish Bluetooth connection between it and other Bluetooth devices. 1. Press Menu key 2. 3. 4. is highlighted. Press Options Choose On and press Ok. Continue pressing until you finally Exit. Setup Bluetooth. Change. PAIRING TO THE CELLULAR PHONE (not possible charging the Handsfree Kit) 1. 2. 3. Bring the cellular phone at about 20 cm from the Hands-free Kit.
c. AUTO ACCEPT MODE 1. Press Menu key 2. 3. 4. 5. 6. d. Setup Bluetooth. is highlighted. Sway the joystick to the right to view Paired devices window. Choose the name of this hands-free kit and press Options Set as authorised. A statement “Connections will take place without confirmation. Continue?” appears. Press Yes. Continue pressing until you finally Exit. ANSWERING/RECEIVING A CALL When the phone is receiving a call, ring tone will be heard on the phone and on the Hands-free Kit. 1.
i. RECORDING FOR VOICE DIALING Note:Voice dialing entries must be stored in the phone’s memory (not on the SIM card!). 1. 2. 3. Press Menu Key Contacts. Choose and Open an entry you want to make a voice dial. Under the selected entry, highlight the phone number and press Options Add voice tag. 4. Follow the instructions displayed on screen. Note: You may use any word(s) or just use the person’s name for a voice tag. 5. Wait until the word(s) is repeated and automatically saved by the phone. 6.
SONY ERICSSON K700i / S700i / Z1010 / Z600 / T610 / T628 / T630 a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your cell phone and other Bluetooth devices. 1. 2. 3. b. Press to access Main Menu. Scroll to Connectivity, Select. Bluetooth, Select. Turn On, Select. Continue pressing to exit. PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit) 1.
d. MAKING A CALL with the Handsfree Kit on Normal dialing 1. Enter the contact number and press Call key. Audio will be heard on the Handsfree Kit. 2. Shortly press the Pick-Up/Hang-Up Button to terminate the call. Voice dialing Make a call by saying a voice name/voice tag. But first, refer to step i and j for the procedure when activating and recording for voice dialing. 1. Shortly press the Pick-Up/Hang-Up Button to activate voice dialing. 2.
j. RECORDING FOR VOICE DIALING Note:Voice dialing entries must be stored in the phone’s memory (not on the SIM card!). 1. 2. 3. 4. 5. 6. Press to access Main Menu. Scroll to Settings and press Select. Choose Voice control, Select. Voice dialing, Select. Edit names, Select. New voice, Add. (Contacts list will appear). Choose among the contacts whichever you want to have a voice name/voice tag. When it’s highlighted, press Select. Follow the instructions that will be displayed on screen.
SONY ERICSSON P800 / P900 / P910 a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Flip to open mode. On the phone’s Applications window, scroll to Control Panel and tap it using the “stylus”. On the lower portion, tap Connections index. Tap Bluetooth. Tap Settings index. On the Operation mode, tap On. 2. Tap to exit and return to the Applications window. b.
Voice dialing Refer to step g and h for the procedure when activating and recording for voice dialing. 1. Press the Pick-Up/Hang-Up Button once to activate the voice dialing. 2. A beep will then be heard on the Handsfree Kit prompting the user to say the name of the person to call. 3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. 4.
FREQUENTLY ASKED QUESTIONS (FAQ) 1. 2. 3. 4. 5. 6. 7. Am I using the correct pairing Mode according to my phone? Why won’t my Supertooth II won’t go into Pairing mode? Is my Supertooth II Charged? Why will my Supertooth II not connect when turned on or comes into range (10m)? Why can’t I hear any sound from the Speaker? Why is the Supertooth II noisy and distorted? Is it safe to use Bluetooth devices, I have heard they can allow unauthorized connections? 1.
4. Why will my Supertooth II not connect when turned on or comes into range (10m)? • Make sure you are using the correct profile for your phone, Headset or Handsfree. • Some phones will not connect to Supertooth II immediately when in range and require the user to press the Pick-Up/Hang-Up key on the Supertooth II once, to establish connection. 5. Why can’t I hear any sound from the Speaker? • Make sure the Volume control knob is turned up when making the connection or making a call.
Specifications: Bluetooth Standard ............................... Bluetooth V1.1, Class II Frequency............................................. 2.4GHz Maximum communication distance....... Approx. 10m Operating Talk Time ............................. 20 hours Operating Standby Time....................... 800 hours Charging Time ...................................... About 3 hours Bluetooth Profiles supported................. Handsfree, Headset Battery Type .........................................