User guide

5
• See "Noise Reduction and Voice Isolation" (page 18) for more information.
Having problems getting the Q1 to recognize your voice commands?
• Make sure you say the command clearly, speaking at a consistent speed.
• If the headset does not respond, repeat the command.
• There is a microphone on the bottom tip of the Q1. Make sure that it is pointing towards your
mouth and that it is not covered or muffled by your face.
• Speak louder than any background noise.
• Try changing the Q1's sensitivity level: see "Sensitivity Level" (page 26).
• If you are in a very noisy place, you may find that it is easier to answer a call using the Q1
buttons: click the BlueAnt button to answer the call, or double click it to reject the call.
Having Some Other Problem?
• For more suggestions on solving problems you might be experiencing with the Q1, see
"Troubleshooting" (page 31).
• See "Q1 Reference" (page 34) for a full list of all the Q1's button combinations and voice
commands, with detailed explanations of what the functions do.
• If you still can't solve your problem after checking all the information in this manual, then
please call us before returning your Q1 to a store.