Instruction Manual

11
iPhone users: To use Siri it must be enabled on your phone. Go
to Settings > General on your iPhone and check that Siri is set
to ON. If you have set a passcode lock, you will need to set Siri
to ON in the passcode lock menu.
Android users: Depending on your handset, you may need
to disable the phone password lock to use voice dialing over
Bluetooth. Check your phone manual for further information.
Switch On and Off
To Do This
Power On
Hold down
for about 3 seconds,
until the LED is solid white (red if
the battery charge is low)
Power Off
Hold down
for about 3 seconds,
until the LED fl ashes red
Note: The Ribbon will switch off automatically after 5 minutes
if there is no phone or music source connected.