Manual

ENGLISH
15
1. Wait to be prompted to start sending contacts to the SENSE.
2. Go to your phonebook and select the contacts you want to send to the SENSE. Choose
the option to “Mark All” or “Select All” if this is available on your phone (if this is not
available, you will need to transfer each contact individually).
3. Select the option on your phone to “send” or “beam” contacts, business cards, or
v-cards via Bluetooth, and select the “BlueAnt S3” from the list of Bluetooth devices.
See your phone’s manual for help with this step.
Note: some phones do not support phonebook transfers at all. If this is the case, the
SENSE will read out the caller’s number instead.
Updating your Phonebook Contacts on the SENSE
If you add or change entries in your phonebook then you need to update the contacts on
your SENSE by pressing and holding the + and - symbols together for about 3 seconds.
If you have two phones connected, this updates the phonebook for the primary phone only.