Product Description SUPERTOOTH LIGHT is a Bluetooth handsfree kit that supports headset or handsfree profile phones. Its special features include Full DSP Noise Cancellation/Echo Cancellation, thus, it provides advanced audio quality. It is designed for easy handsfree operation and superior performance. Don’t forget: Drive safely and within the law. Check if the national or local legislation in your country does limit the use of mobile phones while driving.
Charging When the Charge Indicator (4) turns Red, the kits’ battery is low. Charge the unit. 1. Connect the supplied charger to an external power source. Connect the charger’s plug to the Charger Port (9) of the SUPERTOOTH LIGHT. Charge Indicator (4) Status: Steady Red: Low Battery Steady Orange: Charging Steady Green: Full Charge 2. When fully charged, disconnect the charger. Power On/Off Power On: Push in the Microphone Shaft (5) until you hear a click, and release.
2. While holding the Accept Button (1), switch the kit on (Press-and-release the Microphone Shaft (5)). 3. The Bluetooth Indicator (3) will turn a blinking red/blue, when you see this, release the Accept Button (1). The kit is now in pairing mode. 4. While the kit is in pairing mode, access the Bluetooth menu of your phone. Turn on the Bluetooth function then execute a Bluetooth search, or discover. (See your phone’s manual for specific instructions.) 5.
Installation Fix the metal clip of SUPERTOOTH LIGHT to the sun visor. Attach the magnetic back of SUPERTOOTH LIGHT to the fixed metal clip. The SUPERTOOTH LIGHT must be placed in such way that its microphone is directed to the mouth of the user. Basic Operations IMPORTANT: The kit needs to be ‘paired’ to your Bluetooth mobile phone first, before you can use the following functions. See Pairing to your Bluetooth Mobile Phone on page 3. Make a Call (Normal Dial): Dial the number on your phone.
Redial (For Handsfree Profile Phones only): Press Accept Button (1) for 3 seconds. The last dialled number will be redialled. Reject a Call (For Handsfree Profile Phones only): During the ring tone, press End/Reject Button (2). The incoming call will be rejected. Volume Setting: Increase or decrease the volume by pressing the Volume Up (8) or Volume Down (7) button. Press repeatedly until desired level is reached. This setting will be remembered by the kit.
Troubleshooting and Support Documents Phone/Device Software Please make sure you have the latest firmware upgrade for your phone, especially if you are using a PDA Phone. Go to the support section of the manufacturers’ website to check you have the latest version. Many new mobile phones, pda’s and computers phones require a Bluetooth patch to improve Bluetooth functionality from the original released version.
SUPERTOOTH LIGHT Specifications Bluetooth Compliance: .................. Bluetooth version 1.2 specifications Supported Bluetooth Profiles: ...... Supports headset and handsfree profiles with automatic detection Operating Range: ........................... Up to 10 meters Frequency: ...................................... 2.4 GHz Talk Time: ....................................... Up to 15 hours Stand-by time: ................................ Up to 800 hours Charging Time: ...............................
This equipment is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
