User Guide X3 Micro Bluetooth Headset Introduction 1-2 Bluetooth headset overview 3-5 Getting started 6-11 Using your headset 12-18 Using your headset with multiple Bluetooth devices 19-23 Function / Button matrix 24-25 LED indicator chart 26-27 Audio indicator chart 28 Additional information 29-32 Declaration of conformity 33-35 Regulatory information 36 Frequently Asked Questions 37-48 Contact Us and Warranty Process and conditions 49-52
Introduction lntroduction Your Bluetooth headset is a portable headset solution based on Bluetooth wireless technology. Please read the "Additional Information” before using your headset. What is Bluetooth wireless technology? Bluetooth is the most advanced cable-replacement technology available today. It enables effortless, cable-free connections between your Bluetooth devices.
Bluetooth Headset overview Headset overview 1 Indicator LED 2 Multi Function Button (MFB) 3 Volume Control + 4 Removable Ear Hook 5 Speaker 6 Microphone 7 Charging Port 03 04
Getting started Getting started Before you can use your headset, you must do the following two things: 1. Charge your headset battery for 4 hours using only the charger provided. IMPORTANT NOTE: 2. Pair your headset with a Bluetooth enabled device, for example, a mobile phone. It is recommended to charge the battery only when it goes flat. This will ensure the battery life is preserved.
Getting started Charging the X3 Micro with the USB connecter 1. Plug the USB charging cable into the charging port of your headset. 2. Plug the other end of the USB charging cable into the PC/Mac's USB port or the car charger. 3. When charging is complete (Red indicator turns off), remove the charging adapter or car charger, and detach the USB charging cable from your headset. Charging the X3 Micro with the Wall Charger 1. Plug the AC Charger into a 240v wall socket. 2.
Getting started Power On / Off Pairing the X3 Micro Headset with a Bluetooth mobile phone or PDA Power on your headset Before using the X3 Micro for the first time, you must pair the headset with your mobile phone. The Bluetooth audio connection between the headset and your phone can be established by first setting up a paired link. The X3 Micro can store pairing information for three (3) different Bluetooth mobile phones and PDA's.
Using your headset 5. Put your headset into pairing mode by long pressing (3 seconds) the Volume up button. You can see the blue indicator and red indicator cross blink every second. 6. Your headset is now ready to be discovered by your Bluetooth mobile phone. 7. Perform Bluetooth device discovery on your mobile phone to add a new device. It takes a few seconds to search for and find other Bluetooth devices around you. 8. Phone display will show "X3 Micro" as found.
Using your headset 3. Short press the MFB on your headset. It may take a while to set up the Bluetooth connection if the Bluetooth connection is down. 4. After you hear a beep, say the name of the contact you want to call. 5. To cancel the voice dialing or end the call, short press the MFB button. Note: If your phone rings first, wait until your headset rings, then short press the MFB. Your phone takes time to set up the Bluetooth connection if the Bluetooth connection is down. 2.
Using your headset To reject an incoming call Note: For safety reasons, do not always adjust the listening volume to the maximum setting. 1. Make sure your phone supports Handsfree profile. For Headset mode Call Reject must be done using the phone. 2. When your headset rings, long press the MFB until you hear a long beep. Adjusting the volume Your headset listening volume and ring volume can be adjusted during a call; your headset To mute the microphone 1.
Using your headset To turn the flashing LED lights off (for night time driving) Phone Software Please make sure you have the latest firmware upgrade for your Phone especially if you are 1. Make sure the headset is on but not connected to any phone. using a PDA Phone. Go to the support section of the manufacturers’ website to check you have 2. Short press the MFB the latest version. Many new pda phones require a Bluetooth patch to improve Bluetooth button 5 times. 3.
Using your headset with multiple Bluetooth devices Using your headset with multiple Bluetooth devices To answer a call on any of the paired phones Your headset can be used with up to three different Bluetooth V1.1/V1.2 compliant devices that When any of your paired phones rings you can answer by - support Headset or Handsfree profile. 1.
Using your headset with multiple Bluetooth devices Note: Your headset takes time to set up the Bluetooth connection with the required phone. If you hear the ring tone from your headset, short press MFB 3. End the call by short pressing the MFB 2. After you hear a beep, say the name of the contact you want to call. 3. To cancel the voice dialing or end the call, short press the MFB again to answer this call.
Function / Button matrix Resetting your headset Function / Button matrix Note: If you have paired the headset with 3 devices you cannot then enter into pairing mode as the memory is full. If you want to pair your headset with another phone you must reset your headset to clear the paired devices list. Resetting your headset clears all the current pairings. All device data will be lost. Function 1. Short press and release all the three buttons on your headset together for less than 1 second.
LED Indicator chart Function Last call redial using the current connected phone when connected Last call redial using the first paired phone when not connected Reject a call Volume up ButtonPo long press for 3 seconds long press for 3 seconds short press 1 time LED indicator chart Headset State LED Indication Power on Blue indicator blinks twice Power off Red indicator blinks twice Pairing mode Red & Blue indicator alternate blinks Reset Purple indicator blinks twice and then Blue & Red indicator
Audio Indicator chart Audio indicator chart Headset State LED Indication Headset state Audio indication Mute Red indicator blinks once per second Power on Ascending melody Low battery Red indicator rapidly blinks twice every 5 seconds Power off Descending melody Pairing success Fast melodic tone Note: Sniff mode: The sniff mode is for power conservation and short response times. When in sniff Volume adjustment Short beep.
Additional information Additional information Product care Please check the laws and regulations on the use of mobile phones and hands free equipment like Do not attempt do disassemble your headset. Your headset does not contain consumer serviceable or replaceable components. Only Blueant service partners should perform service. your headset in the areas where you drive. Do not carry or store flammable goods such as gas, Do not place your headset in extreme hot or cold temperature.
Additional information X3 Micro specification Bluetooth compliance Bluetooth version 1.2 with Headset profile and Handsfree profile Bluetooth power 2.5mW (0.0025W) Max. cordless distance 30 feet (10 meters) Weight of headset 13g Standby time 180 hrs Talk time 7 hours Normal re-charge time 1.5 ~ 2 hours Battery type Li polymer rechargeable battery Battery information The rechargeable battery of your headset is not fully charged when it is new.
Declaration of conformity Declaration of conformity FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device must accept any interference received, including interference that may cause undesired operation. 2. This device may not cause harmful interference. pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory information FCC RF radiation exposure statement: Regulatory information This Transmitter must not be co-located or operating in conjunction with any other antenna or Any modifications or changes (e.g. antennas) made to this headset that are not expressly transmitter. approved by Blueant may void the user's authority to operate this headset. Blueant is not responsible for any radio or television interference caused by unauthorized modification of this headset.
FAQ FREQUENTLY ASKED QUESTIONS (FAQ) General 1. What is the main difference between the X3 micro and other Bluetooth headsets? 2. What is included in the X3 micro package? 3. How does the X3 micro use the Bluetooth technology? 4. How do I handle calls when the X3 micro is connected? 5. Can I transfer an ongoing call back to my phone to continue it there? 6. How many devices can I pair to the X3 micro? 7. Is my phone compatible? 8. What is the passcode/passkey of the X3 micro? 9.
FAQ 6. My X3 micro worked great but now it won’t connect, what can I do? 7. Why can the talk time and standby time differ from the products specification? 8. Why does my phones battery not last as long as it used to? 9 I am having trouble pairing a second phone, what can I do? 10. How can I stay near the X3 micro but not have calls diverted through it? 11. My phone says “Bluetooth Module not found” what can I do? 12.
FAQ 4. How do I handle calls when the X3 micro is connected? For incoming calls simply press the MFB button (multi-function button) once to answer the call. button once to activate voice dialing or dial as per normal from your For outgoing calls press the MFB phone and the call will transfer to the X3 micro. For redialing the last number called, press volume for 3 seconds, To terminate an ongoing call press the MFB button once. 8.
FAQ 13. Can I use my X3 micro with my computer for VOIP applications? Yes, you can connect the X3 micro to a PC or Mac that supports the Headset or Handsfree profile. To do this you need to have Bluetooth enabled in your computer by using a Bluetooth USB Dongle or having a computer that has Bluetooth inbuilt. Depending on the Bluetooth Software the connection process is different. Simply put the X3 micro into Pairing mode, then search for it using your computers Bluetooth Software.
FAQ 7. If I cup my hand over a bluetooth device the signal strength and quality suffers. Why does this happen? Bluetooth signals are radio waves and so do not need line of sight to operate. But, radio waves cannot travel through water and as the human body is made up of mostly water they cannot travel through it. And so, your hand will create a barrier causing slight interference and a loss of signal quality. 3. Is my X3 micro charged? A red light will blink twice every 5 seconds when the battery is low.
FAQ 7. Why can the talk time and standby time differ with the products specification description? The talk time and stand by time will differ based on different brands’ mobile phones, different distances between devices and different Bluetooth link status (active, sleep, sniff mode etc.) 11. My phone says “Bluetooth Module not found” what can I do? This means that your phone cannot find its internal Bluetooth chip for some reason. Restarting your phone should fix this problem.
Contact Us and Warranty Process 16. I have read all the solutions in this document but I still cannot get my X3 micro to work properly, what can I do? Please make an enquiry to support@blueant.com.au or call the Blueant Customer Service Team on 1300 669 049 (AUS) or 0800 443 122 (NZ) BlueAnt Warranty Process 1. Should you be having difficulties in the operation of your X3 micro please refer to the F.A.Q in this Manual. 2. Check our website for more information, updated manuals and troubleshooting. www.
Warranty Warranty Terms and Conditions 1. Blueant Warrant the original purchaser of this product only. 2. Blueant will replace or repair any faulty product provided it has not been misused or abused in any way. 3. There are no user serviceable parts inside this product. Using a non-authorized repairer will void the warranty. 4. X3 Micro Warranty is valid for 2 years (24 months) from the date of purchase. 5. Proof of purchase must be supplied to obtain warranty.