X3 Micro FAQ
X3 Micro General 1. What is the main difference between the X3 micro and other Bluetooth headsets? 2. What is included in the X3 micro package? 3. How does the X3 micro use the Bluetooth technology? 4. How do I handle calls when the X3 micro is connected? 5. Can I transfer an ongoing call back to my phone to continue it there? 6. How many devices can I pair to the X3 micro? 7. Is my phone compatible? 8. What is the passcode/passkey of the X3 micro? 9. Can I change the passcode of the X3 micro? 10.
7. If I cup my hand over a bluetooth device the signal strength and quality suffers. Why does this happen? 8. What Bluetooth mobile phones can use the X3 micro headset? Troubleshooting 1. How do I re-connect my X3 Headset? 2. Why won’t my X3 micro go into pairing mode? 3. Is my X3 micro charged? 4. Why can’t I hear any sound from the Speaker? 5. Why is the X3 micro noisy and distorted? 6. My X3 micro worked great but now it won’t connect, what can I do? 7.
General 1. What is the main difference between the X3 micro and other Bluetooth headsets? The X3 micro can connect to paired devices on request. Press the MFB (Multi-Function Button) once to connect to the first paired phone, twice to connect to the second paired phone or three times to connect to the third paired phone. For example if you have a personal mobile and a work mobile these can be the first two devices and a computer can be the third. 2.
. Can I transfer an ongoing call back to my phone to continue it there? Yes, simply short press the MFB and volume buttons together and the call will transfer back to the phone. Or long press the MFB button, the headset will turn off and the call will continue on the phone. 6. How many devices can I pair to the X3 micro? The X3 micro can store pairing information for 3 different phone devices and connect to either when requested using Multi-Connect Call Switching Technology.
12. How often should I charge my X3 micro? You should charge the X3 micro when the LED Indicator rapidly flashes Red twice every 5 seconds. The battery will last for about 180 hrs on standby and much longer if the X3 micro is switched off in between uses. 13. Can I use my X3 micro with my computer for VOIP applications? Yes, you can connect the X3 micro to a PC or Mac that supports the Headset or Handsfree profile.
Bluetooth 1. Is it safe to use Bluetooth devices, I have heard they can allow unauthorized connections? For Bluetooth security reasons, once you have set up your Bluetooth devices we recommend turning OFF the visibility option in the Bluetooth Menu of your phone so that other Bluetooth users cannot see the your phone. (This only applies to a few mainly older Bluetooth enabled phones as most new phones have better security.) 2.
6. Can other electrical devices cause interference with Bluetooth? Bluetooth technology employs a technique called frequency hopping to constantly change the frequency at which it sends data, reducing interference with wireless devices like wireless LAN’s, cordless landline phones. Noise Interference can occur if the Bluetooth device is used in close proximity with microwave.
Troubleshooting 1. How do I re-connect my X3 Headset? Press the MFB button once shortly to re- connect to the first paired phone. (Voice dial will be activated if enabled in phone, short press MFB to cancel this). Short press the MFB and VOL down (-) together to disconnect. 2. Why won’t my X3 micro go into pairing mode? Follow through the instructions in the X3 micro Manual. Press Volume to enter pairing mode.
charge the headset. Some people like to have their phone ring loudly, but this may cause distortion when transferred to the X3 micro speaker. In your phone, set up a Profile with lower ringing volumes and keypad tones and activate when using with X3 micro. (See your phones user manual for instructions on setting up profiles). Also, you may have low antenna strength from your phone network which may cause signal drop outs or disruption. 6.
10. How can I stay near the X3 micro but not have calls diverted through it? The X3 micro will remain connected within a range of 10 meters so if you are staying near the device but want to take calls through the phone simply switch the X3 micro off by long pressing the MFB button. 11. My phone says “Bluetooth Module not found” what can I do? This means that your phone cannot find its internal Bluetooth chip for some reason. Restarting your phone should fix this problem.
Please make an enquiry to support@blueant.com.
