User's Manual

Getting Started 13
Charging the Battery
Charge the device first when using the device for the first time or have not used it for a
long time. The device can be charged with a charger or a cradle. You can also charge the
battery by connecting it to your computer with the provided micro USB cable.
When the battery is low, the device will emit a sound and display a low power message.
When it is charging, the charging lamp will show red light. When the battery is fully charged,
it will turn to green light.
The charging status will also show on the lock screen.
To charge with the charger
Plug the micro 5-pin end of the charger into the multipurpose jack of the device. Connect
the USB cable of the charger with power adapter. Plug the charger into a power outlet.
When the battery is extremely low on power, the device may not turn on. Charge the device
enough and try to turn it on again. You can use the device while charging. But it may take
longer time to charge the device fully.
Connect the charger properly; it may damage the device.
The device may heat up. If it gets hotter than usual, stop charging.
Do not remove the battery before disconnecting the charger. It may damage the device.
NOTE
CAUTION