User's Manual

Application 37
- to set the camera to use the flash automatically.
- to disable the flash at all times.
• Tap for more camera settings.
- Color effect: Tap and set color effect of images.
- Face Detection: Tap the slider to turn on or off the automatic face detection.
- Selectable Zone Auto Focus: Tap to set a zone for auto focus.
- Saturation: Tap to set the saturation level.
- Contrast: Tap to set the contrast level.
- Sharpness: Tap to set the sharpness level.
- Select auto Exposure Mode: Tap to set how light values are calculated. Frame
Average measures the entire frame. Center Weighted measures the light in the center
of the scene. Spot Metering measures the light value at a specific location.
- Scene mode: Tap to change the scene mode.
- Store location: Tap slider to include location information for each photo using the
device’s GPS.
- Picture size: Tap to select the size of photos in pixels.
- Focus mode: Tap to set the focus mode of camera.
- Picture quality: Tap to set image quality. Higher quality images requires more storage
space.
- ZSL: Tap the slider to turn on the ZSL option to take a photo immediately after tapping
. When this option is set to off, the camera will bring an image into focus before
capturing it.
- Anti Banding: Tap to set Anti banding feature to decrease fluctuations in brightness
of images. Set to higher frequency for more light oscillation.
- Select ISO: Tap and set ISO number. Use lower ISO number to make your camera
less sensitive to light; higher ISO numbers to take a photo in darker situations.
- Redeye Reduction: Tap to enable or disable redeye reduction.
Taking Panoramic Photos
To take a panoramic photo:
1 Make sure that camera mode is set to .
2 Tap to take a photo. Pan slowly to the left or right. If you are moving too quickly,
a message Too fast appears on the screen. The progress is displayed on the
capturing screen with a bar .
3 Tap to end taking a photo. The device make a panoramic photo and is indicated
with a bar . To cancel rendering, tap .
4 To view the photos taken, swipe the screen from the right edge. To go back to the
camera, swipe the screen from the left edge. The photos are displayed in Filmstrip
or Grid view.
The settings for taking panoramic photos are not available.
NOTE