Quick Guide

Basic
15
4.6 Battery Hot Swap
-This device supports Battery Hot Swap function.
-Battery Hot Swap is a function to replace the battery with a spare battery while using the device without Power Off.
1
Turn off the LCD by pressing the power button.
2
After unlock the battery locker, remove the battery inside the device.
3
After replacing the charged battery, lock the battery locker.
4 To use the device, press the power button and check that the LCD is turned on.
Battery hot swap operation procedure:
• Before hot swap, turn off the LCD screen using the Power button.
• The hot swap battery required for this function keeps charging while the device is turned on, and it stops
when fully charged.
• When you use the device for the first time, it is recommended to use the device after charging it in the Power
On mode for at least 3 hours..
• Do not use Hot Swap within about 3 minutes after initial booting of the device.
• After removing the battery used for Hot Swap, replace it with a fully charged spare battery within 2 minutes.
• In case that the battery is not replaced for 10 minutes after removing the battery for Hot Swap, the device
will automatically power off to prevent discharge of the hot swap battery. At this time, you need to be careful
as data loss may occur.
• Do not replace SIM, SAM, or MicroSD Card while Hot Swap is in progress.
• Re-run at least 15 minutes later after running Battery Hot Swap.