Operator`s manual

BLUEBIRD-15
The aerator is shipped with the handle detached. 3.
Mount the handle using two ½" wrenches.
Slide handle onto handle mounting brackets.a.
Insert and tighten fasteners, which are located b.
on handle mounting brackets.
CAUTION!
Be certain that the clutch cable is properly
routed.
Model 742 Handle
Connect top of control rod to rear wheel control 4.
handle with fasteners located on rear wheel
control handle using the upper hole on the control
rod.
Connect bottom of control rod to 5. OUTER side of
lever on the torque arm through the lower hole,
using the fastener assembly.
8060-033
Attaching non-folding handle
8060-033
Connect upper control rod
8060-035
Connect lower control rod
AsseMBLY