Operator`s manual

22 - BLUEBIRD
INSPECTION SCHEDULE
Out of
Box First 5 Every 10
Each
Use
Engine Oil
Gear box oil
Engine air cleaner
Clutch and cable
Chain tension
Belt wear and tension
Tine wear and condition
Fasteners
Sprockets and set screws
Frame condition
Decals
LUBRICATION SCHEDULE Lubricant Every 20 Every 60 As
Required
Storage
Engine Oil
1
Gear Box Oil
1
Rear Wheels Lithium based
grease
Chain Graphite
dry lubricant
(aerosol)
Tires Light
machine oil
Linkage 30 W Oil
2
Cleaning
Regular cleaning, washing and lubricating will prolong
the service of the machine.
NOTE: Use care with power washers to avoid damage
to warning decals, operator instruction labels,
bearings, chains and engine. Limit direct spray on
these items.
DO NOT EXCEED 1000 PSI WATER PRESSURE
FOR CLEANING
Two Minute Rule
Aerators may be tipped on the engine guard for
cleaning and access for no more than 2 minutes.
Engine damage may result from gasoline draining into
the crankcase if prolonged. See engine manufacturer’s
operating and maintenance instructions.
MAIntenAnCe AnD seRVICe
1
- See Engine Owner’s Manual
2
- After each pressure wash or steam cleaning