Operator`s manual

BLUEBIRD-25
Throttle Cable
Model 742 (Honda Engine Only)
Adjustment
Start engine and allow it to reach operating 1.
temperature.
Adjust the throttle cable at the adjuster bracket by 2.
turning the adjuster nut. Tightening will increase
engine speed, loosening will reduce engine
speed.
NOTE: A properly adjusted throttle will slightly
increase engine speed as the clutch engages.
If the clutch engages too soon, the engine will •
stall.
If the engine speed is too high, the gradual •
controlled start is lost.
1. Throttle spring
2. Adjuster bracket
3. Adjuster nut
4. Throttle cable
5. Throttle lever
6. Cable screw
7. Stop screw
As the cable length increases between the
cable screw and adjuster nut the engine
speed decreases. If engine speeds too low,
the engine will stall as the clutch engages. As
the cable length decreases between the cable
screw and adjuster nut, the engine speed
will increase. If engine speed is too high, the
controlled start will be lost.
1
2
3
4
5
7
6
MAIntenAnCe AnD seRVICe