#.
䭓This User’s Manual is protected under the related copyright laws. 䭓This User’s Manual is produced by Bluebird Soft Inc. The company has made every effort to avoid errors and omissions. Please understand that some parts may not reflect the actual state. 䭓The supplied basic programs are protected under. Reproduction, transfer or deletion of the programs without prior consent is strictly prohibited. 䭓Depending on users’ environments, programs or peripherals, some parts of this Product may not work normally.
&RQWHQWV 4BGFUZ *OTUSVDUJPOT $BVUJPOT GPS 1SPEVDU 6TF "CPVU UIF 1SPEVDU Checking components Checking names of parts Buttons Product features -FBSOJOH #BTJDT Connecting/Disconnecting Battery Insert/Remove the USIM Card Insert/Remove the MicroSD Card About battery Switching On/Off power Communication status indication Adjusting screen Using stylus pen Resetting terminal Hard-resetting 6TJOH 64# $BCMF $POOFDUJOH "DUJWF4ZOD Installing ActiveSync Using ActiveSync BIP-7000 4 5 6 13 14 15 16
6DIHW\ ,QVWUXFWLRQV Read these instructions and warnings to use the Product in a safe manner and to prevent accidents. <$BVUJPOT JO SFMBUJPO XJUI CBUUFSJFT> <4BGFUZ (VJEFMJOF> 䭓 Batteries may explode when damaged, impacted, heated, flooded or taken apart with a gimlet. Make sure to keep the batteries out of reach of children or pets. 䭓 Do not use the Product in the area with the risk of explosion. 䭓 If the Product is wet, do not put it in a device that may heat the terminal (heater, microwave oven, etc.
&DXWLRQV IRU 3URGXFW 8VH BIP-7000 Read these instructions carefully to keep yourself safe and to avoid loss of property. 1. This Product is EMC-compliant. For safety and health, use the authentic parts supplied by the manufacturer. Any inauthentic part may affect safety. 2. Do not press the power button when the Product is wet. Touching the adapter or power cord with wet hands may cause an electric shock. 3. Do not modify, disassemble or repair the Product at your discretion.
$ERXW WKH 3URGXFW $IFDLJOH DPNQPOFOUT [Stylus Pen] [Main set] [Wrist Strap] [Standard Battery] [Extended Battery] (Option) [Adaptor] [Desktop Cradle] [20pin USB cable] 䭓Thank you for purchasing a PIDION Product. Please make sure all the above components are included. 䭓The images in this User’s Manual may not reflect the color and shape of the actual product. (Please contact the Customer Care Center if you wish to purchase any additional or optional products.
BIP-7000 $IFDLJOH OBNFT PG QBSUT Charging LED Receiver Communication LED Stylus Pen Speaker LCD Screen Stylus Pen Strap Holder Front Scanner Button Send Button Function Button Enter Button End Button Side Scanner Button Back Scanner Button Barcode Scanner Window Flash Camera Side Scanner Button Function Button Enter Button Direction Button Battery Number/Character Buttons Power Button USB Cable Connector Function Button Reset Button Microphone Wrist Strap Holder 5
$ERXW WKH 3URGXFW #VUUPOT Button Description Barcode button Used to operate the barcode functions. Call button Used to start the phone program. If you press this button once while using the phone program, a call is made to the last party in the call list.
BIP-7000 Button Description End button Ends the phone program. You can finish a call by pressing this button during the call. You can also exit an application program. Press and hold (at least 3 sec) this button to switch off the phone function. Arrow buttons Used to move left/right/up/down. Enter button Changes lines in the text input mode. This button works like the Enter key in computer.
$ERXW WKH 3URGXFW ࣊ ൊ Description ESC button BKSP button The cursor moves backward, erasing the letters. It works like the Back Space key in computer. If you press and hold (at least 3 sec) this button, the letters are deleted one by one promptly and continuously.
BIP-7000 ࣊ ൊ Description SHIFT button Used to switch between Lowercase/Uppercase English alphabet. (The default is Lowercase English.) If you press this button once and then an alphabet key, the uppercase of the key is entered. Then, input mode is switched to the lowercase. If you press this key twice, the input mode is remained in the Uppercase like Caps Lock until you release it. To release the Caps Lock, you need to press the SHIFT key twice.
$ERXW WKH 3URGXFW Button Description Fn button Numeric / Alphabet / symbol button The default is Numeric. Used to enter numbers, alphabets or symbol. * button Press and hold this button for over 3 seconds to switch between Vibration/Ringer modes.
BIP-7000 Button Description # button On the Phone main window, # is entered. On the windows other than the Phone main window, if you press and hold this key, the phone is locked. Space button The cursor moves to the right, leaving an empty space. It works like the Space key in computer. F1 ~ F9 buttons You can define the functions.
$ERXW WKH 3URGXFW Button Description Power button Used to switch On/Off the terminal. Reset button Soft Reset All the programs in use are closed and the system is rebooted. Hard Reset The product is initialized.
BIP-7000 1SPEVDU GFBUVSFT Item Features CPU PXA 320, 806MHZ OS Windows Mobile 6.5 / Windows CE 5.0 (Optional) Item Features Camera 3.0M AF Flash WLAN IEEE 802.11 b/g Bluetooth v2.0+EDR, Class2 RAM 256MB GPS O ROM 512MB G-Sensor O WCDMA/ GSM • Tri-Band UMTS/HSDPA (WCDMA/FDD) 850/1900/2100 MHz • Quad-Band GSM 850/900/1800/1900 MHz • EDGE(E-GPRS)/GPRS multi-slot class 10 • Output power : - Class 4 (2 W) for GSM900 - Class 3 (0.25 W) for UMTS/HSDPA - Class E2 (0.
/HDUQLQJ %DVLFV $POOFDUJOH %JTDPOOFDUJOH #BUUFSZ <5P DPOOFDU UIF CBUUFSZ> Align the battery to the groove and insert in the direction of the arrow. <5P EJTDPOOFDU UIF CBUUFSZ> Push down using both thumbs to remove the cover. 14 BIP-7000 Manual 䭓We strongly recommend that you use the adapter which was purchased with the product for charging the battery. 䭓However, the 20pin charger of an ordinary mobile phone may also be used to charge the PDA battery.
BIP-7000 *OTFSU 3FNPWF UIF 64*. $BSE What is a USIM card? 䭓USIM (Universal Subscriber Identity Module) is a user identification card which is inserted into a W-CDMA phone. 䭓This card integrating the SIM card containing subscriber information and the Universal IC Card(UICC) containing communication and banking function provides various functions including user authentication, global roaming, and e-transaction. 䭓This chip is required for communication with the 3rd generation WCDMA terminals.
/HDUQLQJ %DVLFV *OTFSU 3FNPWF UIF .JDSP4% $BSE <3FNPWF UIF 64*. $BSE> To remove the USIM card, lightly slide it away from slot. What is a MicroSD card? MicroSD card is a micro flash memory media which is used to store and move data. <1SFDBVUJPOT> 䭓Applying excessive force to remove the memory card will result in a fault of the device. 䭓Removing the memory card or shutting power off while using a memory card may result in loss of data, or malfunction of the card and the terminal.
BIP-7000 "CPVU CBUUFSZ <*OTFSU UIF .JDSP4%> Please push the MicroSD with facing up toward the arrow. <3FNPWF UIF .JDSP4%> When you push MicroSD deeply toward inside by finger, it will come out and take that part out.
/HDUQLQJ %DVLFV 4XJUDIJOH 0O 0GG QPXFS ö In order to prevent damage of battery power, the modem is switched off automatically. Please charge the battery. ö The continuous talk time and standby time are measured under the actual environment, but may vary depending on the usage type. 䭓The [Power] button is located on the right side of the product. 䭓The [Power] button should be pressed shortly.
BIP-7000 $PNNVOJDBUJPO TUBUVT JOEJDBUJPO For the terminals which support WCDMA communication, you can view the GSM or WCDMA 1xEVDO communication status with the [Communication status indication lamp] on the upper right side of the terminal. Communication status indication lamp "EKVTUJOH TDSFFO You can set the stylus pen input value on the LCD screen. 4FUUJOH TDSFFO For the terminals which support GSM communication, the lamp indicates the GSM communication status.
/HDUQLQJ %DVLFV 6TJOH TUZMVT QFO 3FTFUUJOH UFSNJOBM Use a stylus pen to select/execute/move a target on the screen. The stylus pen is attached in the top right of the terminal. Press the [Reset] button on the front of the terminal slightly with the stylus pen. 5BQ You can touch icons on the screen with the stylus pen to select or execute the icon as you click the left mouse button. %SBH Used to select multiple items. You can select characters or images as you drag the mouse pointer.
BIP-7000 )BSE SFTFUUJOH Holding Button. Button for 5 seconds after 䭓Hard-reset is used when the terminal doesn’t respond to soft-reset. Hard-reset initializes the terminal to factory default. 䭓In case of hard-reset, please be aware that every data gets eliminated except for the datas that are saved in Program store. 䭓Bluebird Soft assumes no responsibility for loss of data and program. Therefore, you should back up critical data and programs before hardresetting the terminal.
8VLQJ 86% &DEOH Start Ķ Settings Ķ Connections Ķ USB to PC You can use various USB peripherals connected with the terminal by selecting [Use advanced network function]. This menu is enabled as the peripherals are connected with the terminal through USB cables. 22 BIP-7000 Manual [USB to PC] increases consumption of battery power. You can save battery by deselecting this function when you don’t use any peripherals.
&RQQHFWLQJ $FWLYH6\QF BIP-7000 *OTUBMMJOH "DUJWF4ZOD 䭓This is based on Microsoft ActiveSync 4.5 English Version. 䭓If you use a different version, it may differ from the instructions of the manual. 䭓You may download the most recent version from the Microsoft website. 䭓Windows Vista user requires to install the Windows Mobile Device Center not ActiveSync. 1 Download [Microsoft ActiveSync] from the website of Microsoft, and install the program in the PC.
&RQQHFWLQJ $FWLYH6\QF 2 On the [License Agreement] window, select Ķ On the [Customer Information] window, fill in the and field Ķ On the [Target Folder] window, select the . 3 The [Microsoft ActiveSync] is installed when installation process is ready. 4 The [Microsoft ActiveSync] program is installed.
BIP-7000 6TJOH "DUJWF4ZOD 䭓The screenshots are for the [Windows Mobile] version. The images may vary depending on the version of the software. 䭓You must connect the terminal to PC or notebook first to use [MicroSoft ActiveSync]. You can copy/paste files, or install/uninstall programs through synchronization with the terminal. 䭓USB cables are sold separately. Please contact the Customer Care Center if you wish to buy one.
&RQQHFWLQJ $FWLYH6\QF 3 The folder shows the image, music or document folders in the terminal. You can save the files in the computer. <1SFDBVUJPOT JO VTJOH "DUJWF4ZOD> 䭓The message “Unknown Device” pops up after the computer detects the USB device This message may be displayed when you switch on the terminal as it is mounted on the <20pin USB cable>. If you dismount the terminal and then mount it back to the <20pin USB cable>, the ActiveSync program works properly.
BIP-7000 Remove the terminal from the <20pin USB cable>, reboot the computer, and then, return the terminal to the <20pin USB cable>. 䭓The terminal does not work when you remove and return the battery To prevent this problem, you should press the [Send] button or select [End] button in the Start menu with the stylus pen so that Windows Mobile (or Windows CE) should “Exits System” before you remove the battery.
8VLQJ %DUFRGH 5HDGHU 6TJOH 4DBOOFS Press the [Front Scanner], [Back Scanner] or [Side Scanner] button to start scan a barcode. The scanned barcode information is automatically saved in the PDA. 4DBOOJOH #BSDPEF To scan a barcode, keep a distance of about 10 cm between the barcode and the barcode scanner window and scan the barcode at the correct angle. Scanner Button To use a barcode in a specific program, contact the manufacturer of the specific program.
