Product Overview

ManualsBrandsBluefin ManualsCopper Press Tools & JawsCopper Press Tool w/ 1/2", 3/4", 1" Jaws

Table Of Contents

页 2

Blueﬁn CPTLKIT Copper Press Tool w/ 1/2",

3/4", 1" Jaws

General Information

Speciﬁcations

TOOLING

Designed in conjunction with the Viega ProPress system, JW, Nibco, REMS,

Conex fittings with stop, ensuring total system compatibility.

Jaws compatible with ZLTLKIT Zoomlock ﬁtting press tool.

360 degree rotary head.

Sturdy tool body and ﬂexible telescopic handles give users a fresh using

experience.

Model

CPTLKIT

Net Weight

8.2 lbs

Gross Weight

12.7lbs

Capacity

1/2'', 3/4'', 1''

JAWS

1/2" Jaws 3/4" Jaws 1" Jaws

Instruction

1. CUTTING THE TUBE

Cut the tube square using a displacement-type cutter or ﬁne toothed

saw.

Note: Cut tubing a minimum of four inches away from the contact area of the vise to prevent

possible damage to the tubing in the press area.

Avoid cutting through grooves, manufacturer’s stamps, or

engravings on the tube surface.

2. DEBURRING THE TUBE

Deburr inside and outside of the tube to the proper insertion depths.

The tube ends must be thoroughly deburred after cutting. Damage to or twisting of the sealing

element during installation is prevented by deburring.

Use a wire brush, Scotchbrite pad, sand cloth, or sandpaper to

remove loose dirt and rust particles from the pressing area.

Damage resulting from the wrong deburring tool

Connections may leak if they are damaged by improper

deburring.

Failure to deburr tubing will reduce the service life of the

system and can cause premature leaks.

3. PRESSING THE FITTING

Identify an unpressed connection

during pressure testing when water

or air ﬂows past the sealing element.

Use the press tool to make a

permanent connection.

Connections are fast, ﬂameless and

guaranteed.

321

Care of Tool

There is virtually no maintenance required. However, it’s good practice to keep indenter tips free of

residual deposits and other debris.

We strongly recommend that you:

1. Clean tool to remove debris regularly.

2. Don’t spray oil into tool to lubricate.

3. Don’t attempt to disassemble tool or make repairs.

This is a precision hand crimp tool and should be handled as such.

NOTE

Exclusive position

for short end of Tee

coupling