Instructions / Assembly
www.factorybuysdirect.com
200423-01A24
•
•
OPERATION
WARNING: If you do not follow
these instructions exactly, a re
or explosion may result causing
property damage, personal
injury, or loss of life.
•
-
•
-
D.
-
1.
2.
3.
4.
WARNING: You must operate
this replace with the screen
in place. Make sure screen
is installed before running
replace.
NOTICE: During initial operation
of new replace, burning logs
(optional accessory) will give o
a paper-burning smell. Orange
ame may also be present. This
will only last a few hours.
5.
-
Note: The rst time the replace is operated
after connecting the gas supply, the control
knob should be pressed for about 30 to 60
seconds. This will allow air to bleed from the
gas system. If pilot does not stay lit, refer
to Troubleshooting, pages 29 through 32.
Also contact a qualied service technician
or gas supplier for repairs. If the ignitor or
electrode are not working properly and until
repairs are made, light pilot with match.
•
-
6.
FOR YOUR SAFETY READ BEFORE LIGHTING
LIGHTING INSTRUCTIONS