CORNER COMBO WOOD FIREPLACE MANTEL MODEL FBD28TCC-M-HC/MO Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-573-0674, 7:30 am - 4:15 pm CST, Monday through Friday or email customerservice@usaprocom.
PRODUCT SPECIFICATIONS 21" cm . 3 5 34 15" m 38.1 c 43.46 110.3 " 8 cm 39.33" 99.9 cm PACKAGE CONTENTS If a part is missing or damaged, return to place of purchase (exterior wood components are not replaceable).
HARDWARE CONTENTS AA FF BB GG CC HH II DD REPLACEMENT PARTS LIST EE Item AA BB CC DD EE FF GG HH II Description Hardware Package Cam Dowel Cam Lock Wall Anchor ST4 Screw 1 3/16" ST5 Screw 2 3/8" ST4 Screw 5/8" Connector Bracket White Key ST4 Screw 1 9/16" Part # HP006 PCAM-023 PCAM-023 ML066-01 GB/T 951 4×30 GB/T 950 5×60 GB/T 951 4×16 SJ002 ML067-01 GB/T 951 4×40 Qty 1 16 16 2 8 2 18 3 1 8 WARNING: When tightening screws, do not over tighten, this may cause threads to strip.
ASSEMBLY INSTRUCTIONS 1. Insert Cam Locks (BB) into Panel (B). Screw Cam Dowels (AA) into the Left Side Panel (C) and the Right Side Panel (D). Attach Panel (B) into assembled frame (C, D) by tightening the Cam Locks (BB) as shown in Figure 1. 3. Fasten the wood support brackets attached to the Left Side (C) and Right Side (D) Panels with ST4Screw 1 9/16" (II) to the Base (E) as shown in Figure 3.
ASSEMBLY INSTRUCTIONS 5. Fasten the wooden support brackets attached to the top of the mantel assembly to the Top (A) with ST4 Screw 1 9/16" (II) as shown in Figure 5. 6. After assembling the mantel, lift to the upright position. Carefully, push the fireplace insert from the front of the mantel as shown in Figure 6. Hardware Used II 4) ST4 Screw 1 9/16" A Fireplace Insert Figure 6 II 7. Position the fireplace to the desired location as shown in Figure 7. Wall Figure 5 Figure 7 200087-01A www.
ASSEMBLY INSTRUCTIONS CORNER APPLICATION 8 . Turn the fireplace Top Panel (A) over. Using the supplied Connector Brackets (GG), attach the Mantel Top (A) to the Top Triangle Panel (H) with ST4 Screw 5/8" (FF) as shown in Figure 8. 10. Fasten the wooden support brackets attached to the top of the mantel assembly to the Top (A) with ST4 Screw 1 9/16" (II) as shown in Figure 10.
ASSEMBLY INSTRUCTIONS 12. After assembling the mantel, carefully lift to the upright position. Push the fireplace insert from the front of the mantel as shown in Figure 12. 14. Install the Set Square Support (H) to the holes drilled in step 13, with ST5 Screw 2 3/8" (EE) as shown in Figure 15. This block is used to support the Top Triangle Panel (F). For thin walls, insert white key (HH) into wall anchor and push to “pop” open anchor wings.
WARRANTY KEEP THIS WARRANTY Model ________________________________ Serial No. _____________________________ Date Purchased ________________________ Keep receipt for warranty verification. REGISTER YOUR PRODUCT AT WWW.USAPROCOM.COM IMPORTANT: We urge you to register your product within 10 days of date of installation, complete with entire serial number which can be found on the rating plate. Please fill out the warranty information above for your personal records. Retain this manual for future reference.