User Guide

VXi B250-XTS User Guide
PAGE 11
Multipoint Mode allows you to pair and switch between two Bluetooth devices.
Enabling Multipoint Mode
• Turn the headset on. It will display a blinking red light and you will hear a voice prompt, “Power on.”
• While pressing the MFB button, quickly press the Volume Up and Volume Down buttons at the same
time, and then release all buttons.
• You will hear 4 rising tones.
• Once Multipoint Mode is active, shut the headset off.
Pairing the B250-XTS headset to the first Bluetooth Device
• Get the first Bluetooth device ready to pair to the headset.
• Put the headset in Pairing Mode.
• Once the first Bluetooth device is connected, shut off the device and the headset.
Pairing the B250-XTS headset to the second Bluetooth Device
• Repeat steps for pairing the second Bluetooth device
• Get the second Bluetooth device ready to pair to the headset.
• Put the headset in Pairing Mode.
• When the second Bluetooth device is connected, turn it and the headset off.
Using two Bluetooth devices with the B250-XTS headset
• Start with the B250-XTS headset turned off. Turn both Bluetooth devices on, and make sure both
are ready to accept the headset connection.
• Power on headset.
• The B250-XTS headset will connect to both Bluetooth devices. As each Bluetooth device
connects to the headset, you will hear the voice prompt “Your headset is connected.”
MULTIPOINT MODE