User Guide

VXi B250-XTS User Guide
PAGE 8
Multifunction Button (MFB)
& Indicator Lights
Volume Up / Mute
Volume Down
ON/STANDBY/OFF
HEADSET CONTROLS
Turn Headset On: Hold down the MFB for approximately 2–3 seconds until you hear a voice prompt,
“Power on.” The red light will flash once every second.
Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect to the
last device that it was paired with, putting itself into standby mode. (The headset can also be put into
standby mode with a quick press and release of the MFB). The blue light will flash indicating an active
Bluetooth link. The headset will have a voice prompt, “Your headset is connected.”
Turn Headset Off (conserves battery power): Hold down the MFB for approximately 4–5 seconds until you
hear a voice prompt, “Power off.” A red light will flash 4 times and the headset will turn off.
Volume Increase: Quickly press and release
the Volume Up/Mute button. Repeat until
desired volume is attained.
Volume Decrease: Quickly press and release
the Volume Down button. Repeat until desired
volume is attained.
Microphone Mute/Unmute: While in standby
or on a call, hold down the Volume Up/Mute
button for 2 seconds until you hear a beep.
A mute reminder will be heard every 10
seconds. Repeat button press to unmute.